I just gambled on an Acer board from eBay... It doesn't appear to be in the wiki or elsewhere on the web. The pictures are awful, but the logo and the case design (which is different than any other Acer I've seen) are visible.
What do you all think? Did I make a bad call?
Possible new Acer variant
- Scottex
- Location: Spain, Madrid
- Main keyboard: Realforce 55g TKL
- Main mouse: Logitech G500
- Favorite switch: IBM Beam Spring
- DT Pro Member: -
caps seem high quality, coiled cable is always a good sign as well as no winkeys
but in the end you'll have to wait until someone identifiees it here or for it to arrive
but in the end you'll have to wait until someone identifiees it here or for it to arrive
- Chyros
- Location: The Netherlands
- Main keyboard: whatever I'm reviewing next :p
- Main mouse: a cheap Logitech
- Favorite switch: Alps SKCM Blue
- DT Pro Member: -
The caps are almost certainly identical to Acer's old ones, which were dye-sub ABS (which I recently showed is actually dye-sub).
Those caps were Alps-compatible, but I've found those exact same caps on both my KB-101A as well as on my 6512, and both were winkeyless. Therefore I'd guess blue Alps, Acer switch or Acer dome with slider. I.e. could be anything.
Those caps were Alps-compatible, but I've found those exact same caps on both my KB-101A as well as on my 6512, and both were winkeyless. Therefore I'd guess blue Alps, Acer switch or Acer dome with slider. I.e. could be anything.
- Tuntematon
- Location: Canada
- DT Pro Member: -
I saw this one too, it sat in my watch list for a little while. I did some quick research and couldn't come up with anything definitive, though I would say they are most probably Acer switches. Whatever it is, for $40 I wouldn't say it's a bad call. You'll have an uncommon and probably nicely built Acer in your collection. And if it is blue Alps, then I'm the one who made a bad call!
- ohaimark
- Kingpin
- Location: USA
- Main keyboard: Siemens G80 Lookalike
- Main mouse: Logitech G502
- Favorite switch: Blue Alps
- DT Pro Member: 1337
http://deskthority.net/keyboards-f2/myt ... 11947.htmlMuirium wrote: ↑Dyesub ABS? What witchcraft is this?
(I vaguely remember such an investigation recently. Links plz.)
This is what you were thinking of.
- ohaimark
- Kingpin
- Location: USA
- Main keyboard: Siemens G80 Lookalike
- Main mouse: Logitech G502
- Favorite switch: Blue Alps
- DT Pro Member: 1337
I'm returning after a long hiatus.
The keyboard was actually produced in 1994 -- one of the latest consumer models I've seen with a native DIN connector. It is somewhat unique in that its backplate is plastic (and integrated into the top half of the case). In addition, the stabilizer mounts are injection molded with the rest of the plate.
Usually plastic mounted switches feel worse than they do in metal. This is a rare case where the reverse is true. While there is a more "cushy" and "plasticine" feel, the balkiness typical in Acer switches is reduced by the plastic plate.
I forgot to mention that the keyboard is practically a Model M clone... The aesthetics are hilariously similar.
The keyboard was actually produced in 1994 -- one of the latest consumer models I've seen with a native DIN connector. It is somewhat unique in that its backplate is plastic (and integrated into the top half of the case). In addition, the stabilizer mounts are injection molded with the rest of the plate.
Usually plastic mounted switches feel worse than they do in metal. This is a rare case where the reverse is true. While there is a more "cushy" and "plasticine" feel, the balkiness typical in Acer switches is reduced by the plastic plate.
I forgot to mention that the keyboard is practically a Model M clone... The aesthetics are hilariously similar.
Last edited by ohaimark on 19 Dec 2015, 21:17, edited 1 time in total.
- Chyros
- Location: The Netherlands
- Main keyboard: whatever I'm reviewing next :p
- Main mouse: a cheap Logitech
- Favorite switch: Alps SKCM Blue
- DT Pro Member: -
So it's a 6311 then? Acer switches don't really use buckling springs, but they're one of the more unique-feeling switches I've tried so far, that's for sure.
- ohaimark
- Kingpin
- Location: USA
- Main keyboard: Siemens G80 Lookalike
- Main mouse: Logitech G502
- Favorite switch: Blue Alps
- DT Pro Member: 1337
Edited to fix the B.S. mistake. I'm quite out of it.Chyros wrote: ↑So it's a 6311 then? Acer switches don't really use buckling springs, but they're one of the more unique-feeling switches I've tried so far, that's for sure.
Yes, it is a 6311. No suffix -- it's the FCC # JVP6311. Perhaps the first model in the lineup? I posted photos on the wiki.
http://deskthority.net/wiki/Acer_6310_series