The Samsung M-10 I'm redoing has four color varieties of the MD cruciform mount. Each color is a different weighting. Lightest on the left to heaviest on the right.
Black and orange is alpha and number keys. White and cream is the spacebar. White and orange is the modifier, Fkeys, and so on. Black with white is the 2U keys in the heavy areas.
![Image](https://i.imgur.com/0FpPWRF.jpg)
The 2U keys use a form of barrel slider for stabilizing very reminiscent of the Model M. Has a little rubber pad underneath. They really seemed to like that sort of thing as you guys know from the one even at the top of the spring in the regular switch slider.
![Image](https://i.imgur.com/0HP97yw.jpg)
Spacebar stabilizers. Use a simple double hinge snap. Again, the little rubber pads.
![Image](https://i.imgur.com/vLfSrcE.jpg)
And a stop collar like you see on many other boards. Very similar to how Cherry does it on an MX.
![Image](https://i.imgur.com/dfj5S3n.jpg)
And for one last Cherry comparison, only one switch was busted in the board when I got it, and it was a very old repair. The mount was snapped off inside the keycap and it looked like they just decided to superglue the whole mess together. So I drilled out the busted mount from the keycap and cleaned it, then cut an MX Black slider down to size and pinned it to the old slider with a bit of brass wire. Only about a quarter milimeter higher than before and works perfect. As tough as one solid piece of plastic again.
Just shows this kind of repair can be done, in the days when NOS parts eventually dry up.
![Image](https://i.imgur.com/YDWGPYW.jpg)
Hope this helps one or two folks.