deskthority

I had another go, because I realised that while I have mapped my ‘Scroll Lock’ key to ‘mod3’, I never use it anyways, so I might as well just map ‘Escape’ to ‘mod3’, which is otherwise unused (‘mod3’, that is; and then use ‘xcape’). So I did the following:

$ cat .Xmodmap

add Mod3 = Scroll_Lock ...

‘Update’: I just tried to remap my escape key to Super_L (via keycodes; escape is keycode ‘9’), and then just made my Super_L a Mod4 again. Obviously, this just removes my escape key, which doesn't help and prevents me from using xcape with it, but while both Super_L and my escape key were mapped to ...

I'm on i3 and even when I have a winkey i keep it as that and use capslock as my wm mod.
I guess it would depend on what keys you use for commands, I'm not familiar with xmonad, capslock works well for i3 because all the most used commands are on the right hand.

Yes, Capslock would work well ...

Hi everyone,

as far as I know there are a quite a few Unix/Linux people here that might use both old(er)/winkeyless keyboards and a tiling window manager. Thus, I thought I should try my luck here, after I tried to get help on reddit and unix.stackexchange.com, to no avail. I hope it's not off ...

Obligatory status update:

I received the package today (in fact, I just got it from a neighbour who accepted it for me)!

1. This feels rather weird, but not necessarily bad.
2. Although the Board is currently in (some kind of) QWERTZ layout, which I normally use most of the time, I can't type ...

Stabilized wrote: Sure thing, will add you now!

Thanks!

Ok, before I forget to do this again, and hoping I'm not too late:

Could you add me to the queue, as well?

Are those the ones from this eBay listing?

Concerning the AltGr key: I don't know whether Rimrul has changed the location of the AltGr key, but Daniel had the board beforehand and

As a altgr-intl layout user I'm currently contemplating where I would put AltGr to enable the third layer. Probably bottom most single unit key.

Have you ...

Oh, sorry, I really don't know the difference. Do you know how to move this post to "Vendors subforum"?
Thanks.

I think only mods can do this. Maybe you could write a PM to one of the guys listed here ?


Thanks for your comment. This is very helpfully for me. I should learn more about this ...

Pfft. Fejsbook ...

.. and you know there is a "Vendors" subforum so you don't have to post the thread here in "Discussions » Keyboards".

Thankfully, the giveaway is done via Rafflecopter, where you only have to visit their Facebook page and don't need an account.

While I kind of understand why ...

I just wanted to reply that I don't experience this issue when I read the title again and noticed that not only am I using a G81 at the moment, it's also PS/2…

To add something of value: With a G84-4100LCMDE-2 I get Qs, then As, and then Ps (tested using Mousepad).

[…]
While I don't know much about the keys which are different between English and German I do mess around with my layout all the time so I don't think you will have any issue as long as you can flash it for you desired layout. I personally have all my symbols on a layer, so I cant type / or . so ...

I wonder how much shipping was via DHL…

Congratulations, by the way.

The Package arrived today. It's about 12*27*35cm and about 1.1kg

Thanks! I guess that would make shipping (incl. tracking) within Europe about 10–15€?

[…]
The key layout that you are used to is not what effects the learning curve of an ergodox it is more about what physical switch layout you ...

[…]
i use iso de on my ergodox but ordered a planck out of curiosity and figured why not learn a new language..!?
[…]

I thought there aren't really enough keys for that (or for any other ISO layout) on an Ergodox, are there? I kind of asked about this in the Ergodox euro tour thread , but no one ...

[…]

My point is, these caps with "no profile" (like someone says here) are artisans, what we usually define artisans, I definetely accept that people might not like them or that in general DT do not like them.
But if you don't understand/like artisans, it is pointless to still vote for the ...

[…]
The great thing is that this could turn the Best Artisan Keycap Award in a sort of legendary super-hard-to-get prize for artisans makers in general.

The ancient legend says that only a knight of the most pure heart can sculpt an artisan worth of Deskthority.
- (an r/mechanicalkeyboards post ...

Just jump right here for the 3D part :?

Our answer in this topic: https://www.reddit.com/r/MechanicalKeyboards/comments/7i3plk/artisan_of_the_year_again/

[…]

Thanks for the link! Another reminder of why I avoid /r/mk like the plague. Talking about key caps having ‘no profile’, while praising ...

alh84001 wrote: I bit bummed Daniel didn't win it, but congrats to Chyros, well-deserved as well.

I think he specifically stated that he wasn't interested in winning.

dickeroni wrote: I was simply trying to correct part of your previous assessment where you stated they did not use 3D printed sculpts.

He didn't. Read it again.

They also look like actual key caps, which is a big plus…

Oh well, RNGesus was as cruel to me as he always is.

Yeah, my thoughts exactly. I guess the kids won this one.

I voted for the last place (too)

┴┬┴┤( ͡° ͜ʖ├┬┴┬

[…]
This was (and still is) a widespread but wrong belief. Not CRTs, but what they display, cause eye cancer,
and this of course equally applies to other visual devices.

https://deskthority.net/resources/image/43699

https://deskthority.net/keyboards-f2/who-is-that-girl-naming-contest-is-coming ...

I almost forgot that Canadians also get the short end of the stick with this. Using some Toronto zip code, shipping of the Pingmaster would still be US $46.22, which is even more ridiculous than US $57.62 to Germany, considering the US and Canada are right next to each other…

I wonder whether it's ...