deskthority

i agree that it should auto-sense, and that points to a wiring issue, but have you tried forcing it to code set 3 to see if it's just an auto-detection issue?

just a follow-up to my own post asking for help. i tried a few different things after i took my model f apart, nothing really helped. the last thing i tried which i think i helped was that i added a solder jump on my J1 pin of my pro-micro. my converter was reading around 4.5v when plugged in (did ...

just updating in case someone finds this during the search, the updated beta i found is actually for soarers 'controller' and not the 'converter' being talked about here. the debounce code is in the controller, but i dont have a matrix file for my model f xt to use it, so im back to debugging my ...

hi all, just sanity checking something, i've been using the soarers version in the first post, but doing some research i found a version 1.20 beta that he posted. what is the recommended version to use? would this one be safe to use? I'm most interested in the debounce code he added in this version ...

the code sets the initial map for translation: set 1 = XT, set2=AT, set2ext=PS/2 and set3=122, but these should be auto-detected by Soarer and set based on the keyboard-id, it looks like your Soarer is not detecting and ID.

take a look at the trouble-shooting section in the documentation, there ...

are you debugging it at all?

if you use hid_listen, it will show you if any keys are being sent.
if you use QMK toolbox, it will also show if the converter is attached and if any keys are being detected.

has any of these combos worked in the past?

thanks, i'm leaning towards that direction. from peaking at the edges i think the foam is ok, so maybe it's just debris that needs to be vacuumed up--fingers crossed.

since i don't want to remove the space bar, and the easiest way to make a foam template is using the plate (with the space bar ...

hi all i hope the OP does not mind me jumping in with a related question rebuilding a Model F XT. i recently acquired this board and it was in great shape, built the soarers converter from a pro-micro and was able to reprogram/remap the board.

the issue i'm having is that i'm getting phantom key ...