deskthority

1. Do you o ow for sure what keyboard you have? Model M or Model F?
2. What do you get when you use HID listen?

PlacaFromHell wrote: ↑

03 Nov 2020, 01:26

Someone in this forum already found a model F 122 with a cable lock, hopefully this will help you:

viewtopic.php?t=21861

Thanks. Although I wouldn't go as far as sticking that plate on the keyboard the post itself was very much an enjoyable read. Thanks again

Are use my keyboard at work and I am concerned about theft. Ironically I work at a law enforcement agency LOL. I know Kingsington makes locks but they require a small notch in the metal but there's no way you can attach the lock and still use the keyboard at the same time. What have other forum user...

NOS M122 in box. 200.00 plus shipping which is between 25-30 USPS.

I'm unsure what the macro limit per block is, but you could try separating the macros into their own macroblocks every so often as a quick fix. I encountered a similar issue when I was trying to make my entire 122's top function key row print email addresses. Separating them into their own macroblo...

Hello does anyone here have firm information on the amount of macro characters that can be stored in Soarers converter? I’ve created a few F Key macros on my M122 And keep getting an error that the macro block is too big. Similar question if Soarers has limits like that any alternatives for somethin...

All Just to be clear the etching/indentation was there already. Underneath was smooth plastic. I drilled out holes for the LEDs and using a glue gun secured them so they were flush with the surface (the LEDs are rectangular). The overlay/label and LEDs were off a NOS 4683 POS keyboard. For those of ...

Yasu0 wrote: ↑

20 Sep 2020, 00:26

Oh man such a smooth job on this. I may have to attempt copying you. I think I'd be ok with a unicomp overlay. They are cheap enough. Wait so what was there before you did this? Just pure smooth case?

Yes with the very slight indentation

I recently modified a M122 but wanted to add the lock LEDs and make it look as original as possible. Rather than trash a model M to get the lock LEDs bezel I put hats number of IBM Point of Sale (POS) keyboards and used the bezel and LEDs from those.

Not sure which board you’re working with. At the risk of offending you have you flashed the converter with the Soarer’s firmware? I ask because you have to do that first. When you use HID listen does it just say ‘Listening............’?

Thank you. I can’t see your screen shot (blurred) but can you reference where in the docs you were looking at? Thanks. Todd

I would like to modify a M122 by adding an internal soarer’s. My question is that, in reviewing the documents there are a number of extra pins that are designed for aux inputs such as a foot switch etc. can those same inputs be used to change the level of the keyboard? For example using a key switch...

Ok so I know this question has been asked and answered a number of times. Call me a knowledge junkie or just a curious idiot but does anyone know why a solenoid can’t be added to a model M BEYOND THE STANDARD ONE IS MEMBRANE AND INE IS CAPACITIVE.... More specifically if you can retrofit a M122 with...

Greetings. Would like to acquire a model M122 to replace my model M. Assuming money is not a consideration I'm assuming the original model M is the way to go but I’d like to get other points of view. I’m assuming that either way I’ll need a Soarer’s or equivalent. I don’t recall if the Unicomp has l...

When converting a model F122 any thoughts on which controller is best? I’m a newbie who’s been using model M for years but would like a 122 with the solenoid and also if possible caps lock and number lock LEDs.

Thank you in advance for any replies

We’re you able to convert the RS485 to something that a PC can use? Also what cable were you able to use from the keyboard to the pc or converter? I’ve got a few NOS 4683 keyboards id love to convert but despite searching I’ve not been able to find anyone else whose been able to do it

Thank you again for the time and effort to answer my post. If I get I’ll let you know what I discover.

Thanks for all the input. I wasn’t thinking it was a buckling spring keyboard as I’ve got a few model M’s already and use as daily drivers. I was just curious in general about if these (probably Chinese made) keyboards could be used on a traditional PC.

Does this help

New member question. Re the above captioned keyboards what’s involved to get them to work on a PC with either a PS/2 port or USB? For the former I’m not sure if it’s just a physical adapter or if a converter is needed. Obviously the USB would require a converter assuming they can be converted. I’ve ...

Thank you. Any idea where to find such a custom controller?

I’m looking to add a solenoid to a model M ‘Battleship’ keyboard. Can this be done with the xwhatsit controller and accompanying solenoid driver? Apologies in advance if I’ve worded this incorrectly.

WTB model F terminal keyboard with the double row of function/command keys. I’m in the USA.