deskthority

I'm going to do a custom dye sublimation for my keycaps, are there any dimensions for the faces of the various keycaps available anywhere?

I have not seen too many of the various configurations with the Mopar key set and the number pad together (personally I prefer the number pad on these keyboards to the Ins/Del/etc. type right side block). This is the number pad layout I'm currently using with Vial. https://i.imgur.com/dphxCT3.png I...

I do think that the caps lock with the LED in the center of the padlock is the most awkward of the 3...looks a bit visually crowded, maybe? As I said, it's a hard problem to solve, and IBM did this to themselves... Still, this is my favorite effort to-date that I've seen. Might be a bit of an acade...

For the LED overlay suggestions, I like the new ones but please let's stay to the original IBM LED hole locations for the designs. I'm open to moving the overlay but there would be a tooling charge of $100 to $200. The IBM version is actually the first version I did. I have a few variants. https://...

seriously looks like your RP3 and RP4 are 10-pin while PCB is made for 8-pin ones. Yep, sure does, doesn't it? It actually looks like at least one of them is okay, while the others are definitely not. Pin spacing means some of the contacts are almost certainly bridged. For instance. This one looks ...

That said, if somebody were to come up with a better-looking design and have it produced, I suspect a lot of people would rise up and call them blessed. What, like this? https://i.imgur.com/dfXJTEU.png I was able to find a schematic reference for the cutouts on the original Model M, but these unico...

When I installed the solenoid and driver for my F77, I took the liberty of swapping the usbc->usbA cable out for a right-angle cable usbc->usbc I found online so that it would take the stress off the controller board and so I could plug it directly into my macbook. When plugged into my dock, the key...

Given that 0x5CDE on the "E" key, maybe that was meant to be QK_CLEAR_EEPROM (0x5CDF) instead? Still not clear what would have gone on 'D'. Maybe QK_DEBUG_TOGGLE (0x5C01)?

Quick question on the vial firmware. I installed the latest(?) newfxx-vial_20220405 firmware and it configures great so far, aside from a small issue that was probably my fault using tapdance and TO_ together. But I noticed that there were a couple raw (hex) keycodes on layer 2, and in my overzealou...

I followed these instructions exactly for my f77 with xwhatsit 2u backspace and split right shift, but now my backspace key doesn't work any more! Every other key shows up fine in the vial matrix no matter what I do. Can anyone help me out? EDIT: looks like the the spring might have slipped when I w...