deskthority

Another thing I wanted to mention is that I found that these risers work pretty well with the F62 (and probably with the F77). I followed the directions and left them alone for at least 12 hours before using the board, and they are staying put so far with just their adhesive pads. In addition to sl...

I'm trying my darndest but I keep running into issues. I started by nuking any qmk executable I had on my system, just to be sure it wasn't being used. I then, as directed by the Google doc, ran python3 -m pip install --user qmk qmk setup (i run a variant of arch btw) and had it clone into a comple...

I find it interesting how ergonomics is different for different people, but from a similar perspective than you and Muirium I bought myself the F15, as that’s similar in width than a 60%, with dedicated arrow keys (or HHKB fn key), F keys and even arrow keys for left hand usage. All packaged where ...

Where we diverge is in the need to add dedicated keys back to 60%. Every one of those cursor keys, function keys, even the /*-+Enter on the numpad are present on the HHKB function layer by default. That's exactly where I use them. And, for me, it's the ideal place to keep them tucked away and out o...

I don't recall seeing such a mod before - is this common with left-handed number pad keyboards? Not super common, but it's not unheard of . Hi all! Owner of the pictured F50 here. It is indeed not a very common layout, which is surprising to me, and my case for it is entirely based in ergonomics. A...

Going back to my earlier post about the o-ring mod, I wanted to show what the difference looks like between a key with the blue o-ring installed and one without an o-ring. In the photo below, the key on the left has the o-ring, and the one on the right does not. I cannot overstate the effect on typi...

taraskremen please check the section in the manual specific to space bar adjustment. It is a matter of adjusting the shape of the space bar stabilizer wire, and maybe putting some scrap foam or other material between the space bar stabilizer wire and the back of the metal tab so that the stabilizer...

One issue I ran into is that the play in the space bar allows it to rotate enough that it interferes with the "./>" key on the right. On the left, there is a cylinder inside the space bar that keeps it more or less aligned with an otherwise unused barrel, but there is no cylinder on the right, allo...

What problem(s) is the overlap between the bottom row of the keys and the space bar stabilizer wire causing? The keys should bottom out before they can hit the wire. One issue I ran into is that the play in the space bar allows it to rotate enough that it interferes with the "./>" key on the right. ...

Interesting re. the rubber rings, I'd not considered that. I used to use red o-rings on my cherry blues so I've just tried one and it gives a nice soft finish to the keypress, also the key still works fine with the original springs. Right.... this may take some time. (just checked - 1.5mm thick) Fo...