deskthority

Still haven't received any shipping info... I DON'T MIND!

Sorry guys!

I've been super occupied so I haven't had time to enjoy the keyboard as much as I should have sadly! But for the time I have, I really like it!
There's some issues, like the edge of the spacebar! Way way way to sharp! But in overall, I'd rather go a Realforce than the Novatouch, even ...

Fun that you're just starting to talk about this, I'm actually designing/implementing this as a PoC.
(keylogger inside the keyboard that is)

You are getting closer and closer to this one. Which design I personally really like and would love to try out one day!

https://www.trulyergonomic.com/store/image/cache/data/Truly_Ergonomic_Computer_Keyboard-207-750x600.jpg
https://trulyergonomic.com/store/truly-ergonomic-mechanical-keyboard ...

I'm just going to leave this one here:
"Last Week Tonight with John Oliver: Scottish Independence"

https://www.youtube.com/watch?v=-YkLPxQp_y0

Go on, try it out and see why!
I like the first impression of that cable. The angle of it is debatable though. I don't want to say too much since I'm not exactly sure what I'm allowed to talk about yet.


Ahem ! Just imagine that, in red, black, white, grey… it's ordered.

I've seen your set ...

Yeah, it's my own cable. I haven't even unpacked the one that follows it yet.

Now I'm totally hooked at getting a nice spherical set from SP.. None of the GB has really tickled my fancy though..

So, something came in the mail today. I don't have enough keycaps to fill it out enough, but hey, not bad for a random bag from SP
(please excuse the GH escape :/ )

Cheers!

I would recommend you to do as Halvar said, things as grams of pressure can be very tricky to measure just by feel.

Take some measurements with something that is of a known weight, small enough to fit on the keycap without falling off, and stack away. The smaller weights the higher accuracy you'll ...

Hypersphere - I don't think that the NovaTouch will be an actual contender to RF / HHKB, but rather a "step on the way".
The same way light drugs are the gateway to heavier addictions (admittedly keyboards are not as bad on either your health or wallet ^^).

I see the NovaTouch as a great attempt ...

I have to say that I liked the video. Some parts are a little bit tacky and odd, but overall a good "hype me" video.

They're making a bold claim though: "An ultra smooth, tactile key process makes NovaTouch the best feeling keyboard on the market."

I hope to get my hands on one soon! =)

Really nice project, and a beatiful case!

The idea looks fantastic and I can't wait to steal some of your ideas for later projects! =)

Side note, what's the feel of an acrylics case? Flexing much? Odd to tuch?

Good look and I'll be keeping an eye on this one!

Sadly Muirium, I'm not local and I've only been as far as central London once. The best holiday of my life though! =)
Nearly cost me my job! Well come to think of it, it did cost me my job! I fell in love with a girl on the other side of the world and had to move ASAP =)

We're actually up for the ...

FREEDOOOOOOOOM!

Even so, I'm still interested in the manufacturing process.. (I totally want to have the possiblity to make my own caps on very small scale without it costing extreme fortunes)

Very nice ideas and implementations! And the headphones are not crap (I've got the little brother DT 770 PRO 80 OHM)

Great job and inspirational!

I had just moved into a new apartment and only had a couch table as any kind of flat surface to work on, it's about 40cm high or so, ergonomic beyond words...

So, I had placed my desktop on this table, screen on top and case to the side.

I had opened my case for some maintenance and left it open ...

Yesterday I had the fortunate opportunity to actually play around with the same prototype that was shown at Computex! This sample are now in a locked display @ Dreamhack (The world's largets LAN party, held in Sweden), but I got a private showing by courtesy of CM Bram.

This particular sample is ...

Hi everyone,

So I'm part of the Crew @ Dreamhack and had a great experience today!

By a total coincidence I ended up at CoolerMasters booth here. I found a switch-tester laying around and I started to play with it for a bit. A couple of seconds later a friendly and smiley representative shows up ...

^^
This is the reason I like this forum. Appropriate manners even in times like this.

Welcome amospalla, stay active and get on the next tour!

This project is great and I believe that my personal preference are somewhere between the OneHand, OneHand-v.Kile and ErgoDOX. When budget / time allows I will take away a lot from these projects. Thank you guys!


OT: DSA Keycaps - First pick: PJE -> Kile -> Anyone else actively participating in ...

PJE - Are you still looking for DSA profile caps?
I have some that I would be happy to part with to help this project along!

I have a couple of colors, atm. they're totally assorted though, so I can't give you a specific number or colors available. I bought a mystery bag a while back and haven't ...

I'm very very much for minimalism! So the HHKB will most likely be my choice.
But as of yet I've never touched a Topre-switch so who knows what will happen!

Looking forwards to get my hands on this Realforce!

OT: HHKB + My design
Ever since I've first heard about the first HHKB in ~96-98, I've ...

It sounds like I'm going to have to part with a substantial chunk of money soon... :/

I don't mind to wait as said earlier! I'm just interested to try it out when ever I can =)

Updated profile: Location - Sweden

Book me in as interested!

Not sure I would have the spare cash to participate in this though. Guess that depends on where I need to ship it to and when it arrives. Would be happy to be the #10-15-ish in line (more weeks to save up .

I'm so curious about this topre fandom!

A bit out of a recent conversation with sales-rep.
----

Me: The opaque / clear switches you've provided for me. They look extremely similar to Matias switches produced by Dongguan Gaote Electronics Co., Ltd.
Are these switches made by Gaote / Other company or do you make these yourself?

X: Of ...

Findecano:
The big problem with old storage media is that they are slow, inconsistent and just generally broken. Especially when you consider that they are not new-unused floppy-disks.

I totally agree that C++ is valid for many things, but not when the course is supposed to be about assembly, C and ...

Unfinished student ^^
The university (actually "Högskola" in Swedish) had no idea what they we're doing so I decided that my money was better spent elsewhere. Just to give you guys some examples:

Course: "Low level programming"
Actual coursematerial / lectures / examples: Written in C++

Course ...