deskthority

Update:
I replaced the MCP, soldered in an IC slot for the chip, tested each individual diode on the affected column, replaced one or two diodes that i thought were acting funny, and it started working fine again.
(though i stripped the trace to hole in on the right handed board but that was a ...

!!!! 1 week in and the problem returns!
but this time it is happening to me 2wsx\<del> trace!

I did purchase another MCP so i'll i'll try replacing one last time before i try replacing the PCB altogether

FYI if anyone else encounters the same issue. I replaced the MCP chip and it started to work correctly.

To recap, my left hand board's 3edc<backspace> keys would start to hit the entire corresponding row after awhile. I couldn't find any shorts anywhere. I found the column trace to the pin on the ...

Ugh that really sucks.

I really think it's either the teensy or firmware issue.

I started noticing that sometimes, I can unplug everything to "cool" it off, and it'll start working fine. But once I keep one of affected columns pressed, the "mash row" function will activate and i'll have to unplug ...

I noticed you posted this on GH as well. but hopefully you or someone else here might have experience with this issue.

I'm having an issue with the 3edc<backspace> column. The first time it happened, I cleaned it up the solder points and reflashed the keyboard and somehow it got fixed.

Then after ...