deskthority

I took each individual pin one at a time (mostly trying to check if one is broken) some didn't register and others registered keys that weren't on that row....so yeah the teensy is broken. :( which is a shame because now I'm not sure if I should buy another one if it breaks so fast. Not to mention ...

I get 4.79V between GND and column pins. I get nothing with the row pins.

Also I tried to sot a row pin and a column pin manually (actually all of them) and the result is "b99bb95b95bbbbbbbbbb rrrrrrr8cec8888888888ce8cccceeeeeeeeeeeeeeeeeeeeeeeeeevffssfshhhhs;99hs;999ms.;9999mm..m ...

I presume that this value should happen while the controller is plugged.

@Ray:

The columns aren't wired because the picture was taken before soldering those...I didn't got the chance of making one with all the wires present; also at the moment I'me re-doing some of the wiring inside it to eliminate any hardware problems (errors in my work) thus I cannot put a newer ...

I'm using this one...
http://deskthority.net/workshop-f7/how-to-build-your-very-own-keyboard-firmware-t7177.html

It's actually par in par with the tutorial presented here (i have the same layout 15/5)
I'm not familiar to other firmwares or how to program or if they work on teensy 2.0.

I'm open to ...

I've attached a picture (it's missing the wiring for the rows)
It doesn't have any metal in the encasement (it's made out of wood)

I not sure how would that help...the wiring didn't changed from the last time I used it and it worked then. I'm more curios about the behavior of the Teensy 2.0...what exactly does it do when it's broken.

I've rewired everything and it does the same thing, furthermore I only wired one column in an ...

Hey guys,

I'm having a little problem with my keyboard project specifically it no longer works.
It worked just fine thus I started putting it togheter (finishing the case, arranging the wires inside so it would fit, etc).
Once all was done I decided to see if all checks out, and it did minus 2 and ...

well....I feel stupid...there I was trying to make a boot-able linux stick (which I plan on doing anyway just to have it)....Thank you joc, it actually worked.
@gogusrl...nice to see other keyboard-obsessed Romanians

Hey guys,
I'm trying to make a small keyboard but I'm stuck at making the firmware. For some reason I get this error when I run make -f makefile
Error Makefile.JPG

I've duble-triple checked all the code in the H60 folder but I don't seem to see any problem with it (considering that I mostly copy ...