deskthority

could someone please help me out with my Topre problem??
i created a post here on DT..
keyboards-f2/topre-misbihaving-after-4t ... 18688.html

i'm at the point where i think i need to cut of some sides of my topre sheet don't know what to do.

The Topre nightmare continues i spend a good part of the day trying to fix my Topre keyboard without any luck.. Since the letter N and I started to misbehave , aka not feeling right and making strange noises i decided to pull the sheet from the board :shock: I then preceded to carefully place the tw...

so it's bin 2 days (weekend)..i haven't spend that much time behind the keyboard.. And what do i notice now the letter n has the same problem my windows key had. if you don't recall here is the youtube link showing what i mean.. https://youtu.be/2v9Bd83spCY Conclusion i'm the problem clearly i haven...

So i just finished opening my FC660C two times...pffff the window key (normally alt key, swapped them) is now ok.. the letter i was 7th key from the right was a big sheet so nothing i could there without having to remove the entire sheet. :o so i touched the sides of the dome hoping that would help....

Yep just swap the dome under the windows key with one that you're not having problems with, if the problem goes away on the windows key but arises on the key you put that dome under, then it's the dome at fault. If the problem goes away entirely, the positioning of the dome was off. Nice looking bo...

Just on a side note.. Could this problem have anything to do with the lube/ oil i used ?? ( SuperLube oil; partnumber 51004 and SuperLube grease partnumber 21030) the reason why i mixed a dab of grease in the oil was hoping that i wouldn't dry-out as fast as it does.. the amount of SuperLube grease ...

what do you mean by misbehaving ? if it's not actuating or anything like that : usually when that happens you've just put your board together badly and that something is not placed right, aligner right or something of the sort ... so open it up and align everything in the most perfect way there is ...

Hi guys, After experiencing this problem for a fourth time i decided to ask for help as i can't figure out the reason for it happening. The board is re lubed it with a mixture of SuperLube oil; partnumber 51004 and SuperLube grease partnumber 21030. Checked if the Hypersphere rings were ok and every...

For me, personally... assuming that your primary role is to desolder keyboards I would go with the 1.8mm. Reason? When I de-solder keyswitches I drop the desoldering iron directly down onto the joint, the solder melts and the switches pin penetrates into the open iron hole all the way down until fl...

Hi guys.. i'm looking to buy a desoldering station nice cheap one to get started and desolder a couple of keyboards. it's an older model Aoyue the 474 without the ++ in the name.. i have read that it's good practice to keep a spare nozzle but as i never used such a tool i was wondering what size noz...

https://i.imgur.com/EWuWR9S.jpg looks like the K-type hahha.. i returned mine.. :lol: one thing that board showed me ..was that i don't like low-profile keybards ..ever ..ahaha And that even TKL is to much of a waist of space nothing beats my FC660C/M a tad bigger is ok but let's stay under the TKL...

Oh my god that’s amazing.. I would have never thought it possible to literally put everything i don’t like in one single keyboard.. Amazing.. Even the less obvious like not liking a low profile case after having tried a highish quality one.. And to boot the fixed cable hahahha I’m really doing my be...

Ignore the MORON politicians here, who are still busy felching Britain 24/7 instead of concentrating on trade. Where I am living, this is really the 3RD World of Idiot Whites (has to be said) on this Planet. Totally agree i just heard that the world's last male northern white rhine is dead.. to bad...

Nice going Kailh... we need more tactile lubed smooth switches lighter then mx-clear but way way smoother.. Give Zealios a run for their money !!! And sim nice linear smooth as butter switches for those that like them haahaaha... Will there be nice in depth graphs on the input club site??? Also plea...

i have no idea to be honest with you i don't see what all the fuss is about.. IBM model x ..model Y.. for me personally it reminds me of work.. as i have worked for years @ibm most of it was good.. but near the end when all jobs had to be moved to India.. i was basically documenting my work so that ...

The Filco is so shit for this. The UV coating on their caps is like the Juicy Fruit chewing gum -- great while it lasts, which happens to be about 2 minutes. ISO probably limits you somewhat but otherwise it's the sky's the limit in terms of keycap options for a Cherry keyboard -- and also how much...

My favorite keyboard prior to 2017 was the Apple AEKII I had back in 1990, and now I understand why it was so good. However, nowadays I'm addicted to Topre, and I find that they are just "snappy" enough to suit me while being nice and quiet at the same time. I have yet to find a combination that fe...

Like the deep voice as always.. i don't think my FC660C Topre feels mushy i tried the Novatouch when it was sold in shops and did not like it almost gave up on topre. Until someone told me it's a whole different feel than the Novatouch. And indeed it is day and night. Also i like that i can mod my F...

Not a big fan of the HHKB layout .. i understand the esthetic of it..but i need my arrow cluster ..

prefer the bottom model just remove the F-row and it's a better layout in my humble opinion.
Don't like that strange shift/arrow-up combo.. just make the board a bit wider..
As long as it's around the same size as my FC660C.
But i do like the back lighting

Nice job on the " visual guide" still very helpful ..

was very helpful together with this one.. https://youtu.be/l3HhDMS-nNE it was scary at first but no opened it 4 times re-lubing and switched my alt dome with my Ctrl because that one felt a bit off somehow.. strange question but anyone know what type of glue is used if at all to make the domes stick...

i have a couple of spare spacebars...i never used..the only one i use is the red PBT with red Esc key... That's color enough for me.hahahah will wait for Topre to bring out something new that has everything i need for now i'm happy with it. Thinking i don't need the black and blue spacebars will sel...

i just finished re-lubing my FC660C with Superlube oil and the stabs with SuperLube grease.. that was recommended to me by Hypersphere him self ;) Great advise i also added hypersphere rings. and thinking of grabbing an extra set of keyclack rings and sum domes to test out .. Mykeyboards is selling ...

funny..Enjoyed watching

i just finished re-lubing my FC660C with hyperspheres and ohh man it feels awesome.. i am surprised reading how good this board is according to you ..pleasantly surprised for sure !! Who would be against having more capacitive options out there.. ;) How does this compare to something from Royal Klud...

Hi guys, A while back (like a year ago) i went on a quest to find a material to silence my then pinging KUL keyboard.. I wanted a material that was thin, that would stick and worked well for sound isolation and resonance. After a long search i came across a Dutch company called akoestiekwinkel.nl wh...

i'm curious , does it work if you move the caps-lock to different location so not back to the original.
As a test ....


i really like the TADA68 that's why i'm curious...

very interesting to read how people like the layout and typing..Always have bin a bit curios about the Ergodox. Personally i tried "the Truly Ergonomic keyboard" and found out i don't know how to touch type hahaha really stink at typing.. but on my small 65% leopold i'm doing ok.. really need to lea...

nice write up Jipsu;
my current mouse is 121gr (Ducky Secret) with a mouse bungee i got from aliexpress.
as said nice write up will have to read it again to take it all in