Hi all,
Just hunting around on forums again, as you do, and I stumbled across this:
https://imgur.com/a/DVdcI7i
It's some form of military Model M, although I really don't know what the connector is on the end of it.
Any help would be appreciated.
Many thanks,
Reece.
Military Model M
- RBithrey
- Location: Dunstable, UK
- Main keyboard: HHKB Pro Hybrid Type S/Topre RealForce R2 PFU
- Main mouse: Logitech MX Master 3S
- Favorite switch: Buckling Spring/MX Browns/Topre
- DT Pro Member: -
- Contact:
- Darkshado
- Location: Montréal, Québec, Canada
- Main keyboard: WASD V2 MX Clears (work); M, F, Matias, etc (home)
- Main mouse: Logitech G502 (work), G502 + CST L-Trac (home)
- Favorite switch: Buckling spring, SKCM Cream Dampened, MX Clear
- DT Pro Member: 0237
Myoth is on here as well, so maybe he can chime in with respect to the protocol.
As hypkx says, it's probably a PS/2 board given the otherwise bog-standard AZERTY layout. If it's Set 1 or 3, there's converters, assuming the worst case of a never-before-seen custom protocol, the controller is always replaceable.
What I find peculiar is that the inside of the case also looks painted, especially near the controller, could this be some kind of EMI, TEMPEST-style shielding going on?
As hypkx says, it's probably a PS/2 board given the otherwise bog-standard AZERTY layout. If it's Set 1 or 3, there's converters, assuming the worst case of a never-before-seen custom protocol, the controller is always replaceable.
What I find peculiar is that the inside of the case also looks painted, especially near the controller, could this be some kind of EMI, TEMPEST-style shielding going on?