Ericsson and Nokia Numpads
-
- Location: Sweden
- Main keyboard: CM Storm QuickFire TK
- Main mouse: Trust gxt 25
- Favorite switch: Cherry MX blue
- DT Pro Member: -
I got some numpad-ish for some terminals i think.
The ericsson: The Nokia(same type of switches as the Ericsson): So what are those switches? For what machines are these?
The ericsson: The Nokia(same type of switches as the Ericsson): So what are those switches? For what machines are these?
Last edited by gunnish on 03 May 2013, 20:33, edited 1 time in total.
-
- Location: Sweden
- Main keyboard: CM Storm QuickFire TK
- Main mouse: Trust gxt 25
- Favorite switch: Cherry MX blue
- DT Pro Member: -
Ok, They are not dualshot or cherry mx/alps compatible so I didn't find them interesting but fine, I will post a picture of them.Peter wrote:Before I answer your questions :
You need to post a photo with at least ONE of the key-caps 'upside-down' ! ( )
- Peter
- Location: Denmark
- Main keyboard: Steelseries 6Gv2/G80-1501HAD
- Main mouse: Mx518
- Favorite switch: Cherry Linear and Buckling Spring
- DT Pro Member: -
Thank You !!
True, the keycaps are not MX-compatible, but that doesn't mean they are bad .
IIRC, they are dye-sub caps !
If only "keyboardporn" was up ..
True, the keycaps are not MX-compatible, but that doesn't mean they are bad .
IIRC, they are dye-sub caps !
If only "keyboardporn" was up ..
-
- Location: Stockholm, Sweden
- DT Pro Member: 0011
We call them "ICL switches". I think the small keypad connects to a larger keyboard.
-
- Location: Sweden
- Main keyboard: CM Storm QuickFire TK
- Main mouse: Trust gxt 25
- Favorite switch: Cherry MX blue
- DT Pro Member: -
Do you know about the protocol? Can you use something like an attiny without modifying the PCB?Icarium wrote:Yeah, I have the full keyboard, it's pretty standard.
The switches are actually pretty good.
-
- Location: Stockholm, Sweden
- DT Pro Member: 0011
If you are lucky, you could use a Teensy or Teensy++ in the Nokia numpad in place of the controller chip.
- kbdfr
- The Tiproman
- Location: Berlin, Germany
- Main keyboard: Tipro MID-QM-128A + two Tipro matrix modules
- Main mouse: Contour Rollermouse Pro
- Favorite switch: Cherry black
- DT Pro Member: 0010
If anybody is interested in such a Nokia numpad without or with the complete keyboard it can be attached to,
they can have them for shipping costs.
The boards are badly yellowed, pics and some infor in this older thread:
http://deskthority.net/marketplace-f11/ ... t1434.html
they can have them for shipping costs.
The boards are badly yellowed, pics and some infor in this older thread:
http://deskthority.net/marketplace-f11/ ... t1434.html
-
- Location: Stockholm, Sweden
- DT Pro Member: 0011
It looks like these are for sale on Tradera (Swedish auction site).
- Halverson
- Location: Ontario, Canada
- Main keyboard: F660c or HHKB
- Main mouse: Steelseries sensei
- Favorite switch: Topre
- DT Pro Member: -
Any idea on how much to send the board/numpad to Canada?kbdfr wrote:If anybody is interested in such a Nokia numpad without or with the complete keyboard it can be attached to,
they can have them for shipping costs.
The boards are badly yellowed, pics and some infor in this older thread:
http://deskthority.net/marketplace-f11/ ... t1434.html