The Realforce 104 Euro Tour - Round 3
- Stabilized
- Location: Edinburgh
- DT Pro Member: -
I am in the same position with you on that one. And alas I don't have the same kind of organisational skills or pulling power as misterinterface, so I don't think it will ever be destined to ever be very large
Well if you are interested in a small meet up, then just PM me, like I said I live around the Morningside area.
Well if you are interested in a small meet up, then just PM me, like I said I live around the Morningside area.
-
- Location: Hungary
- Main keyboard: Steelseries 7G Wireless
- Main mouse: Razer DeathAdder Leftie
- Favorite switch: Cherry MX Green
- DT Pro Member: -
I'm reluctant to try this... I'm really curious and I'm afraid I might like it, in which case I will have to buy one. But that price...
Oh, what the hell... sign me up.
Thank you!
Oh, what the hell... sign me up.
Thank you!
- 002
- Topre Enthusiast
- Location: Australia
- Main keyboard: Realforce & Libertouch
- Main mouse: Logitech G Pro Wireless
- Favorite switch: Topre
- DT Pro Member: 0002
OK sorry for the delay. Yes we have 11 people now so let's begin!
I am not sure how efficient the current route is but I think it's good enough...If they are some compelling arguments otherwise that everyone can agree on, we can change it. Registrations will remain open as they did for the last tours (i.e. you can join in mid-way if you meet the initial post criteria).
I am not sure how efficient the current route is but I think it's good enough...If they are some compelling arguments otherwise that everyone can agree on, we can change it. Registrations will remain open as they did for the last tours (i.e. you can join in mid-way if you meet the initial post criteria).
- Muirium
- µ
- Location: Edinburgh, Scotland
- Main keyboard: HHKB Type-S with Bluetooth by Hasu
- Main mouse: Apple Magic Mouse
- Favorite switch: Gotta Try 'Em All
- DT Pro Member: µ
Austria and Hungary are a fair bit closer to Macedonia than is the Netherlands. But I'm not sure how much difference that makes for shipping, honestly. Cost seems to vary more depending on where you're sending from than where you're sending too. Mostly…
-
- Main keyboard: filco mj2
- Main mouse: razer mamba
- Favorite switch: blue
- DT Pro Member: -
I am not sure that distance makes difference in price in my country, for within EU at least. The same package I've sent to UK cost me less than the one to Serbia which i basically 30 km from where I live...
-
- Location: Austria
- Main keyboard: HHKB2
- Main mouse: Steelseries Rival
- Favorite switch: Topre
- DT Pro Member: -
It does not really make sense to send it from Germany to Finland and then to Austria.
Depends where it ships from but I would say Netherlands, Germany, Austria, Hungary are all pretty close
Depends where it ships from but I would say Netherlands, Germany, Austria, Hungary are all pretty close
-
- Location: Amsterdam
- Main keyboard: variable: beamspring, Northgate, IBM SSK, Topre
- Main mouse: CST L-Trac
- Favorite switch: beamspring, dampened complicated white Alps, Topre
- DT Pro Member: -
I think you're right, and I'm not even sure shipping to a closer country is necessarily faster, which would have been another reason to change the order ? But assuming there is some speed gain, I guess the most economical with the least list upheaval would be germany-> austria -> hungary -> macedonia -> netherlands -> finland -> sweden ?Muirium wrote:Austria and Hungary are a fair bit closer to Macedonia than is the Netherlands. But I'm not sure how much difference that makes for shipping, honestly. Cost seems to vary more depending on where you're sending from than where you're sending too. Mostly…
But that only works if medowy doesn't mind being quite a bit later on the list.
Most economical in terms of distance would be something like macedonia -> hungary -> austria -> germany ->netherlands -> sweden -> finland (or the other way around), but that would be changing everything and not suitably rewarding those who signed up early ?
- 002
- Topre Enthusiast
- Location: Australia
- Main keyboard: Realforce & Libertouch
- Main mouse: Logitech G Pro Wireless
- Favorite switch: Topre
- DT Pro Member: 0002
Took your first suggestion and re-arranged based on that. The keyboard was already in Germany so as a favour to the person holding on to it I wanted minimal fuss to kick the tour off. Medowy should be fine to wait a bit as I think he actually has an HHKB anyway.
- Daniel
- Location: Blackforest Germany
- Main keyboard: Various
- Main mouse: Kensington Slimblade + MX518
- Favorite switch: Cherry MX Blue and Black + BS
- DT Pro Member: 0028
After I used the keyboard for a week I'll try to sum up my impressions:
If you hold the keyboard in your hand for the first time you'll instantly recognize that it's heavier than the average keyboard. The whole keyboard is really sturdy.
Next thing I noticed is the cable routing on the bottom which only allows you to route the cable either to the right or left side and not straight out of the back of the keyboard.
I really like the font and positioning of the letters on the keycaps. It was also the first time I could take a look at dye sublimated keycaps and I'm impressed how sharp they are, as I expected them to be more blurry. I think I got this expectation from close-up photographs of Cherry keycaps here in the forum but sharpness and contrast really isn't a issue with black on white dyesubbed keycaps like the Realforce has.
What I consider a no-go on a keyboard in this price category is the fact that on almost all of the keycaps the keycap mount kind of shines through on the top.
Besides of that the Realforce is very nice looking.
Now let's shift attention to the typing:
- While I think Cherry MX red are to easy to press for proper typing the 45g of the Realforce are sufficient. I think this comes from the higher initial force which is needed to press a key.
- I bottom out every key while typing, but while you'll get that mushy feeling on normal rubber dome keyboards when bottoming out the Realforce lacks this feeling. I think this is one of the reasons why Topre switches feel that good.
- The different weights of the keys are only noticeable if I pay attention to it. As soon as I just type away I don't notice it any more. I think I could get used to it.
- Unfortunately the only 55g key on the keyboard is the escape key. But I'd really like to try out a all 55g Topre keyboard.
- What I don't like is the rattling of the stabilizers, maybe greasing helps. It's still quieter compared to Costar ones, but higher pitched (which makes it appear to be louder) than plate mounted Cherry ones.
- Compared to the Topre switches Cherry MX black feel like some one poured sand in them. But I only notice this scratchiness when slowly pressing a single switch and not while typing.
- It's really quiet which makes it a good options to be used in office environments without attracting the anger of colleagues.
And as last:
Would I buy one?
Probably not, at least not new, which would cost me 265€ as of now. If would get offered a used one for around 150€ I'd definitely think about it.
All in all apart from the points mentioned above there's really nothing wrong with the Realforce it's a great keyboard and if you have money to blow then buy one!
If you hold the keyboard in your hand for the first time you'll instantly recognize that it's heavier than the average keyboard. The whole keyboard is really sturdy.
Next thing I noticed is the cable routing on the bottom which only allows you to route the cable either to the right or left side and not straight out of the back of the keyboard.
I really like the font and positioning of the letters on the keycaps. It was also the first time I could take a look at dye sublimated keycaps and I'm impressed how sharp they are, as I expected them to be more blurry. I think I got this expectation from close-up photographs of Cherry keycaps here in the forum but sharpness and contrast really isn't a issue with black on white dyesubbed keycaps like the Realforce has.
What I consider a no-go on a keyboard in this price category is the fact that on almost all of the keycaps the keycap mount kind of shines through on the top.
Besides of that the Realforce is very nice looking.
Now let's shift attention to the typing:
- While I think Cherry MX red are to easy to press for proper typing the 45g of the Realforce are sufficient. I think this comes from the higher initial force which is needed to press a key.
- I bottom out every key while typing, but while you'll get that mushy feeling on normal rubber dome keyboards when bottoming out the Realforce lacks this feeling. I think this is one of the reasons why Topre switches feel that good.
- The different weights of the keys are only noticeable if I pay attention to it. As soon as I just type away I don't notice it any more. I think I could get used to it.
- Unfortunately the only 55g key on the keyboard is the escape key. But I'd really like to try out a all 55g Topre keyboard.
- What I don't like is the rattling of the stabilizers, maybe greasing helps. It's still quieter compared to Costar ones, but higher pitched (which makes it appear to be louder) than plate mounted Cherry ones.
- Compared to the Topre switches Cherry MX black feel like some one poured sand in them. But I only notice this scratchiness when slowly pressing a single switch and not while typing.
- It's really quiet which makes it a good options to be used in office environments without attracting the anger of colleagues.
And as last:
Would I buy one?
Probably not, at least not new, which would cost me 265€ as of now. If would get offered a used one for around 150€ I'd definitely think about it.
All in all apart from the points mentioned above there's really nothing wrong with the Realforce it's a great keyboard and if you have money to blow then buy one!
- Muirium
- µ
- Location: Edinburgh, Scotland
- Main keyboard: HHKB Type-S with Bluetooth by Hasu
- Main mouse: Apple Magic Mouse
- Favorite switch: Gotta Try 'Em All
- DT Pro Member: µ
I had similar first reactions to this board. Well, except the weight, which was lighter than all my IBMs! But the Realforce is nice and tough anyway, just more modern than my many kilo beasts.
002 likely needs his stabs greased. They were some of the louder ones I've encountered, already, last year. Especially when compared to the otherwise quietness of the board. I've tried an HHKB since then and it was a great deal quieter.
002 likely needs his stabs greased. They were some of the louder ones I've encountered, already, last year. Especially when compared to the otherwise quietness of the board. I've tried an HHKB since then and it was a great deal quieter.
- Daniel
- Location: Blackforest Germany
- Main keyboard: Various
- Main mouse: Kensington Slimblade + MX518
- Favorite switch: Cherry MX Blue and Black + BS
- DT Pro Member: 0028
The keyboard was successfully delivered to me I accidentally swapped the sender and recipient in the online formular of DHL.
I resent it and it really is on its way to Waffl now.
I resent it and it really is on its way to Waffl now.
-
- Location: Germany
- DT Pro Member: -
Just a quick note, the keyboard's arrived very quick first impression, pretty blown away by the build quality. Will be a pleasure to use this for a week. As with Daniel, I'm pretty blown away by the sharpness of the caps. I haven't used a fullsize board in ages though, it's really pushing the mouse away quite a bit. I can already tell I would love this board as a TKL. It feels amazing.
Can also say, just typing this I can already feel the variable weights quite evidently..
The plate mounted switches are great too. Feel so solid and sturdy. It's also not that loud, actually it's fairly quieter than my Filco TKL with brown switches. I also feel like I am not bottoming out nearly as much.
Will post back shortly.
Thanks again 002.
Can also say, just typing this I can already feel the variable weights quite evidently..
The plate mounted switches are great too. Feel so solid and sturdy. It's also not that loud, actually it's fairly quieter than my Filco TKL with brown switches. I also feel like I am not bottoming out nearly as much.
Will post back shortly.
Thanks again 002.
Last edited by waffl on 02 Jun 2014, 16:44, edited 1 time in total.
- Muirium
- µ
- Location: Edinburgh, Scotland
- Main keyboard: HHKB Type-S with Bluetooth by Hasu
- Main mouse: Apple Magic Mouse
- Favorite switch: Gotta Try 'Em All
- DT Pro Member: µ
You know you will! Which size of keyboard are you thinking? I've tried both full size Realforce and 60% HHKB now; plus a TKL prototype NovaTouch, but it's not the final version yet. There's some differences in feel as well as size.
-
- Location: Sweden
- Main keyboard: Unrevealed DIY
- Main mouse: Func MS-3 R2
- Favorite switch: MX Blue
- DT Pro Member: -
I'm very very much for minimalism! So the HHKB will most likely be my choice.
But as of yet I've never touched a Topre-switch so who knows what will happen!
Looking forwards to get my hands on this Realforce!
OT: HHKB + My design
But as of yet I've never touched a Topre-switch so who knows what will happen!
Looking forwards to get my hands on this Realforce!
OT: HHKB + My design
Spoiler:
- Muirium
- µ
- Location: Edinburgh, Scotland
- Main keyboard: HHKB Type-S with Bluetooth by Hasu
- Main mouse: Apple Magic Mouse
- Favorite switch: Gotta Try 'Em All
- DT Pro Member: µ
Topre: taste the ramen. You'll be eating it for a while to balance out the books…
How's the variable weighting going? And is it heavy enough, overall?
How's the variable weighting going? And is it heavy enough, overall?
- Daniel
- Location: Blackforest Germany
- Main keyboard: Various
- Main mouse: Kensington Slimblade + MX518
- Favorite switch: Cherry MX Blue and Black + BS
- DT Pro Member: 0028
I forgot to mention in my review:
Although the variable weighting wasn't a problem while typing I found my self accidentally pressing for example the w key while browsing, because I rest my fingers on it in order to later close the tab.
Although the variable weighting wasn't a problem while typing I found my self accidentally pressing for example the w key while browsing, because I rest my fingers on it in order to later close the tab.
-
- Location: Germany
- DT Pro Member: -
As my week with this wonderful board comes to an end (unfortunately I actually only got to use it for about two days), I have no doubt that plate mounted topre is my absolute favourite.
I was wondering if anyone knows how the leopold FC660c compares in feeling, sound, etc... The solidity of this realforce is what really feels right to me. It stays put, and feels super sturdy.
A full review coming, but in the meantime, I know without doubt that I would love to have either a TKL realforce (variable is actually quite nice to me in the end), or the Leopold if it compares for compactness.
Top ramen, however... pretty impossible to save. Topre Ramen.. hmm
For me, variable is great. I have a pretty light touch though.
I was wondering if anyone knows how the leopold FC660c compares in feeling, sound, etc... The solidity of this realforce is what really feels right to me. It stays put, and feels super sturdy.
A full review coming, but in the meantime, I know without doubt that I would love to have either a TKL realforce (variable is actually quite nice to me in the end), or the Leopold if it compares for compactness.
Good thing I really like Ramen With some broccoli, egg, etc etc, you can even make instant ramen quite good.Muirium wrote:Topre: taste the ramen. You'll be eating it for a while to balance out the books…
How's the variable weighting going? And is it heavy enough, overall?
Top ramen, however... pretty impossible to save. Topre Ramen.. hmm
For me, variable is great. I have a pretty light touch though.
Last edited by waffl on 02 Jun 2014, 16:43, edited 1 time in total.
- 002
- Topre Enthusiast
- Location: Australia
- Main keyboard: Realforce & Libertouch
- Main mouse: Logitech G Pro Wireless
- Favorite switch: Topre
- DT Pro Member: 0002
Glad you liked it, waffl
I haven't tried the FC660C, but I know it's metal plate mounted unlike the HHKB and I think it should feel pretty similar to a Realforce for that reason. The other good thing about the FC660C now is that they finally switched to dye-sub legends, so no more crappy worn off laser caps.
I haven't tried the FC660C, but I know it's metal plate mounted unlike the HHKB and I think it should feel pretty similar to a Realforce for that reason. The other good thing about the FC660C now is that they finally switched to dye-sub legends, so no more crappy worn off laser caps.