Eastern community announed another kind of metalic board
-
- DT Pro Member: -
KMAC [ 케이맥 Keyboard_Mania_Attic_Craft ]
http://www.kbdmania.net/xe/3118632
Tomorrow !!
TYPE 1 : 케이맥 Winkeyless Silver
TYPE 2 : 케이맥 Winkeyless Titan
TYPE 3 : 케이맥 Winkey Silver
TYPE 3 : 케이맥 Winkey Titan
-PCB, Elements all welded
-Alu, Plate, incl, Bolts
-Alu, Upper/Lower casing, incl, Bolts
-Alu, Legs
Price: 280,000 KRW
4Ss (Switch/Spring/Stabil/Sticker) not included, but there will be another group buy
Keytops, LEDs, Cable.. up to you.
This is a 1st KMAC and probability of successions (2nd and so on) kind of high he says..
bye, by guys..
http://www.kbdmania.net/xe/3118632
Tomorrow !!
TYPE 1 : 케이맥 Winkeyless Silver
TYPE 2 : 케이맥 Winkeyless Titan
TYPE 3 : 케이맥 Winkey Silver
TYPE 3 : 케이맥 Winkey Titan
-PCB, Elements all welded
-Alu, Plate, incl, Bolts
-Alu, Upper/Lower casing, incl, Bolts
-Alu, Legs
Price: 280,000 KRW
4Ss (Switch/Spring/Stabil/Sticker) not included, but there will be another group buy
Keytops, LEDs, Cable.. up to you.
This is a 1st KMAC and probability of successions (2nd and so on) kind of high he says..
bye, by guys..
- webwit
- Wild Duck
- Location: The Netherlands
- Main keyboard: Model F62
- Favorite switch: IBM beam spring
- DT Pro Member: 0000
- Contact:
This looks much better than the earlier prototypes.
- Grond
- Location: Milan, Italy
- Main keyboard: Keychron K2
- Main mouse: Kensington Slimblade
- Favorite switch: Cherry MX Blue
- DT Pro Member: -
Well, I think other costum keyboards went for $400+ without switches, so maybe it's actually 250$ for the case only. That's very expensive indeed. It's a shame companies like diatec don't produce metal keyboards on their own, that would be much cheaper with mass production.
-
- Location: Ugly American
- Main keyboard: As Long As It is Helvetica
- Main mouse: Mickey
- Favorite switch: Wanna Switch? Well, I Certainly Did!
- DT Pro Member: -
- Grond
- Location: Milan, Italy
- Main keyboard: Keychron K2
- Main mouse: Kensington Slimblade
- Favorite switch: Cherry MX Blue
- DT Pro Member: -
I had seen that on GH, but it was a limited edition, wasn't it? I don't like the overall design, but the integrated wristrest may be a neat idea. I also wonder why they opted for this clustered layout instead of regular tenkeyless.
-
- DT Pro Member: -
-PCB incl. (as i said all elements are welded)
-CapsLock keytops, you can use both Cherry's and Maje's
-Spacebar, Ditto
-All elements are on the rear side of PCB
-detachable USB connector or not
-Switch Imbeded diode or PCB welded
-Signal response time configurable
-F1-F12, twelve, Hardware macro keys
-F1-F12 LEDs for macro
-All keys are remappable (own mapping program)
-W/A/S/D LEDs (individual on/off)
-Do not need ISP loader
-you define Keybinary (64bit OS supports too)
-Capslock/LCtrl swap
-ESD safe
-Apple Mac's FN key use
(followings are coming with next PCB version)
-USB/PS2 swap (just plugin)
-NKRO (PS/2)
-CapsLock keytops, you can use both Cherry's and Maje's
-Spacebar, Ditto
-All elements are on the rear side of PCB
-detachable USB connector or not
-Switch Imbeded diode or PCB welded
-Signal response time configurable
-F1-F12, twelve, Hardware macro keys
-F1-F12 LEDs for macro
-All keys are remappable (own mapping program)
-W/A/S/D LEDs (individual on/off)
-Do not need ISP loader
-you define Keybinary (64bit OS supports too)
-Capslock/LCtrl swap
-ESD safe
-Apple Mac's FN key use
(followings are coming with next PCB version)
-USB/PS2 swap (just plugin)
-NKRO (PS/2)
-
- DT Pro Member: -
This time just 100 boards only.
It is NOT a big deal and NOT a chiiiip ones which you eager 4.
4.g.e.t. i.t.
It is NOT a big deal and NOT a chiiiip ones which you eager 4.
4.g.e.t. i.t.
-
- DT Pro Member: -
http://www.kbdmania.net/xe/3121518
Never mind. It has gone.
-It took 90 minutes to go there.
See you.
Never mind. It has gone.
-It took 90 minutes to go there.
See you.