[BATCH#1] Katalyzr 3DPrnted Converter X->USB O-Src [GLOBAL Ship]

[doom2]

Will there be a version compatible with Model F XT?

If soarer or hasu supports it then yes

Anyone need 270 din as well?

Soarer definitely supports it. Not sure about Hasu.

[Wingklip]

Screw mounts and I am sold. White and industrial grey!

Screw mounts are here
That's 1 down

[Wingklip]

Excellent. Let us begin

Who would like to be the first guinea pig? The sacrificial potato to alpha test this?

Alpha will cost 16 with post to Australia lmao

IMG_20170410_192644_HDR.jpg (2.97 MiB) Viewed 6787 times

IMG_20170410_192554_HDR.jpg (3.72 MiB) Viewed 6787 times

Semi assembled (smashed IBM P70 delete key for comparison)

THAT QUALITY :')

IMG_20170410_214437_HDR.jpg (3.15 MiB) Viewed 6787 times

[Spaceman1200]

Too bad i'm in the USA, otherwise i would love to be the test dummy, What on earth happened to that delete key lol

[Wingklip]

Too bad i'm in the USA, otherwise i would love to be the test dummy, What on earth happened to that delete key lol

Lol how much is it to ship A Parcel 17mm thick weighing around 30 grams to the US?

[Wingklip]

Too bad i'm in the USA, otherwise i would love to be the test dummy, What on earth happened to that delete key lol

Lol how much is it to ship A Parcel 17mm thick weighing around 30 grams to the US?

Also it's very cheap to buy because you guys have massive buying power right now

[MercenarySnake]

I would be willing to test out but I'm also in the USA.

[Wingklip]

I would be willing to test out but I'm also in the USA.

Shipping will be $2.50 USD, 17$ USD total, about the same in Australia actually

The case itself is only 22mm when closed but when split into two halves sits at a comfortable 11mm each. I can easily cram it into a load of HDPE foam and ship it safely.

[MercenarySnake]

I would be willing to test out but I'm also in the USA.

Shipping will be $2.50 USD, 17$ USD total, about the same in Australia actually

The case itself is only 22mm when closed but when split into two halves sits at a comfortable 11mm each. I can easily cram it into a load of HDPE foam and ship it safely.

That sounds good to me.

[Wingklip]

We can arrange postage for a Saturday dispatch perhaps

[Wingklip]

There ARE MORE RENDERS!!!!

ALPHA 0.1.1

Pro Micro Case PS2_MAGNETIC.png (119.13 KiB) Viewed 6747 times

Also I am now able to mass produce this at around 4 paired pieces a day.

[Phenix]

There ARE MORE RENDERS!!!!

ALPHA 0.1.1

Pro Micro Case PS2_MAGNETIC.png

Also I am now able to mass produce this at around 4 paired pieces a day.

Looks good!
Will you try to make an 'Ultimate Converter Box' as well? (with all socket options)

Too bad i'm in the USA, otherwise i would love to be the test dummy, What on earth happened to that delete key lol

Lol how much is it to ship A Parcel 17mm thick weighing around 30 grams to the US?

Also it's very cheap to buy because you guys have massive buying power right now

[Wingklip]

I will. It will be a plug into ps2 type adapter with some switches if you need them. Do I really need to have on and off switches for each of the ports on the 5v lines?

I will have at least 5-6 ports flanking the converter. I will try to make some special magnetic mounting hole or even change out the top for this. It should make it much more compact and modular without wasting valuable space.

Anyways, STL is on the front page.

[Wingklip]

Notice: Production of blue PLA parts will be paused until a week after due to my Uni going on holidays for that week. Also means I can't mass produce during that time.

But I still have my trashy prusa

The first alpha test batch will be mostly Black PLA and Gray PLA/Blue PLA alongside some small amounts of red ABS sample. The ABS isn't exactly that good of a quality however as the filament is for some stupid reason degrading at high temperatures and jamming at low ones......

[Wingklip]

Alpha order forms ready for a may dispatch date!

Please fill in so I can get a gist of numbers

[Wingklip]

https://goo.gl/forms/a4Kyp0D7QJX7ubXH2
Order forms here.

MOAR PHOTOS¡¡!!!

IMG_20170416_105546.jpg (3.5 MiB) Viewed 6673 times

IMG_20170416_105707.jpg (3.34 MiB) Viewed 6673 times

IMG_20170416_105851.jpg (3.36 MiB) Viewed 6673 times

IMG_20170416_105559.jpg (3.31 MiB) Viewed 6673 times

IMG_20170416_105817.jpg (3.23 MiB) Viewed 6673 times

IMG_20170416_110034.jpg (3.49 MiB) Viewed 6673 times

[gnmar2723]

Hey I'm interested in getting one since I just now was able to find out my board is xt rather than at

[Crossfire]

Good job, Wingklip! Those are looking really good!
GLWS!

[Wingklip]

Good job, Wingklip! Those are looking really good!
GLWS!

Haha, thanks guys. I'm laying back for a bit for a lot of uni projects and work I have to hand in for the next two weeks. But do expect the industrial gray variant in PLA very soon!

Let's just say that the white color combinations don't look too good (at least to me). Kinda... Not beige enough... as off it came straight outta the kkk

The next big part of the project is designing a universal multi plug adapter for nearly EVERYTHING that has an AT/XT/PS2 scancodes.

That will take ages to make though... Easter break means mailing speed cancer

[t8c]

Responded to the form!

[the_ambyguous]

voted!

[Wingklip]

I see this is gaining traction

[Wingklip]

Hey, guess what kids! Magnets have arrived! They have just enough force such that it will fly open when you try to bend the microusb port up or down too much! Good news: They fit perfectly
Bad News: Still half of them are unaccounted for xd

[Wingklip]

Magnets inserted

IMG_20170601_125516_HDR.jpg (2.2 MiB) Viewed 6537 times

[Wingklip]

Hey guys, I have rev 1.1 in the workings! Good news too, I managed to get my 3d printer at home to print at quite a high quality too. Been taking a while to work it properly

[seebart]

Very nice project Wingklip, thanks for sharing the models for printing!

[Wingklip]

There is a very small tolerance error which causes the two halves to mate with a very small 0.1mm gap. Fixed it in the later models though, unless someone wants it shipped with the 1.0 original version

[Gnohio]

Wow I dont know how I didnt see this before but this project is cool as hell. Those models look nice btw. Voted and will definitely buy a few of these

[Wingklip]

Today is a historic day - the first time I will be shipping anything to anyone in the world! Scottex will be the first to receive a sample in agreement to a trade for a much desperately needed SDL cable!

URAH

[t8c]

Great news! I submitted an order for two some time ago!