TheVan 44 Keyboard Kit (COMPLETE)
-
- Main keyboard: WASD V2
- Favorite switch: MX Clear
- DT Pro Member: -
Leftover sale starts now! In one week on June 28th I will draw the winners and send out invoices!
http://goo.gl/forms/6VqdV1uJ2vxudsaj1
Orders Closed
Hello and welcome to TheVan 44 Group Buy!
PCBs, cnc milled aluminum cases and plates, stabilizers, hardware and keycaps!
$164.00 for the kit (pcb, case, plate, stabilizers, and hardware)
$56.00 per set of keycaps
TheVan 44 is unique in that it was designed around the use of two function layers accessible from either side of the keyboard to maximize layer usability.
I am working with local manufactures to bring you a mostly made in USA keyboard. The PCBs are printed in China and assembled in the US. The case and plate are manufactured and anodized in Arizona.
This Group Buy is limited to 100 Kits. We need to reach 50 kits for this to happen.
1. This buy will run from April 1st until April 30th, unless all 100 kits are claimed sooner.
2. From the end of the buy I will give everyone 1 week to pay their invoices.
3. Orders will then be submitted to manufacturers. I have been quoted with 4-6 week lead time. Of course this could go over by a week or two.
4. Once I receive the goods I will be mailing out all the orders. I'm expecting to have all orders sorted and shipped within a week.
Expected Ship Date of June 1 to June 22.
TheVan 44 PCB
TheVan 44 PCB designed by evangs supports a simple staggered layout with modifier keys surrounding the alphas. The PCB works with TMK firmware and is fully programmable. LED Backlighting is supported. The PCB contains smd components and comes fully assembled.
TheVan 44 Case
TheVan 44 is housed in a custom cnc milled aluminum case and waterjet cut plate designed by evangs. The plate and case can be anodized independently in the following colors: Black, Silver, Teal, Purple, Red, and Orange.
Midnight Drive Keycaps
The Midnight Drive Keycap set is produced by Signature Plastics in the DCS profile with the rows 1 2 3 3. The keycaps are optional but highly recommended as they will give you 100% key support for TheVan 44 layout.
Stabilizers + Hardware
All screws required for case assembly are included. Costar stabilizers are included.
What Else Do I Need?
The only other things you will need are:
Switches - any mx style switch should work
Keycaps - Why not grab a set of Midnight Drive?
LEDs - only if you want to backlight your board
Mini USB Cable
Shipping
US Shipping is $13.45
Canada is $15.50
International Shipping is $22.50
Contact Info and Support
For any questions or concerns about this group buy and throughout the duration of this group buy please email
thevankeyboards@gmail.com
http://goo.gl/forms/6VqdV1uJ2vxudsaj1
Orders Closed
Hello and welcome to TheVan 44 Group Buy!
PCBs, cnc milled aluminum cases and plates, stabilizers, hardware and keycaps!
$164.00 for the kit (pcb, case, plate, stabilizers, and hardware)
$56.00 per set of keycaps
TheVan 44 is unique in that it was designed around the use of two function layers accessible from either side of the keyboard to maximize layer usability.
I am working with local manufactures to bring you a mostly made in USA keyboard. The PCBs are printed in China and assembled in the US. The case and plate are manufactured and anodized in Arizona.
This Group Buy is limited to 100 Kits. We need to reach 50 kits for this to happen.
1. This buy will run from April 1st until April 30th, unless all 100 kits are claimed sooner.
2. From the end of the buy I will give everyone 1 week to pay their invoices.
3. Orders will then be submitted to manufacturers. I have been quoted with 4-6 week lead time. Of course this could go over by a week or two.
4. Once I receive the goods I will be mailing out all the orders. I'm expecting to have all orders sorted and shipped within a week.
Expected Ship Date of June 1 to June 22.
TheVan 44 PCB
TheVan 44 PCB designed by evangs supports a simple staggered layout with modifier keys surrounding the alphas. The PCB works with TMK firmware and is fully programmable. LED Backlighting is supported. The PCB contains smd components and comes fully assembled.
TheVan 44 Case
TheVan 44 is housed in a custom cnc milled aluminum case and waterjet cut plate designed by evangs. The plate and case can be anodized independently in the following colors: Black, Silver, Teal, Purple, Red, and Orange.
Midnight Drive Keycaps
The Midnight Drive Keycap set is produced by Signature Plastics in the DCS profile with the rows 1 2 3 3. The keycaps are optional but highly recommended as they will give you 100% key support for TheVan 44 layout.
Stabilizers + Hardware
All screws required for case assembly are included. Costar stabilizers are included.
What Else Do I Need?
The only other things you will need are:
Switches - any mx style switch should work
Keycaps - Why not grab a set of Midnight Drive?
LEDs - only if you want to backlight your board
Mini USB Cable
Shipping
US Shipping is $13.45
Canada is $15.50
International Shipping is $22.50
Contact Info and Support
For any questions or concerns about this group buy and throughout the duration of this group buy please email
thevankeyboards@gmail.com
Last edited by evangs on 30 Jun 2016, 20:16, edited 13 times in total.
- photekq
- Cherry Picker
- Location: United Kingdom
- Main keyboard: Various Cherry Corp keyboards
- Main mouse: Razer Deathadder (1st gen)
- Favorite switch: Nixdorf 'Soft Touch' MX Black (55g springs)
- DT Pro Member: -
- Contact:
Out of curiosity.. How tall is that case at the front?
-
- Main keyboard: WASD V2
- Favorite switch: MX Clear
- DT Pro Member: -
- Phenix
- -p
- Location: Germany, Cologne
- Main keyboard: F122, soarer´d|Novatouch-s
- Main mouse: Roccat Kone Pure|Rollermouse
- Favorite switch: BS F|Topre-s
- DT Pro Member: -
One question regarding the caps:
Can you please add ISO-compatible z and y caps? (maybe for a little more/as extra? Or is it possible to just buy the modifiers?)
I assume it will be programmable with EasyAVR or something like that?
Can you please add ISO-compatible z and y caps? (maybe for a little more/as extra? Or is it possible to just buy the modifiers?)
I assume it will be programmable with EasyAVR or something like that?
-
- Main keyboard: WASD V2
- Favorite switch: MX Clear
- DT Pro Member: -
will add the iso z and y. The keyboard is programmable via TMK.Phenix wrote: ↑One question regarding the caps:
Can you please add ISO-compatible z and y caps? (maybe for a little more/as extra? Or is it possible to just buy the modifiers?)
I assume it will be programmable with EasyAVR or something like that?
-
- Main keyboard: WASD V2
- Favorite switch: MX Clear
- DT Pro Member: -
Only one week left to claim your spot for TheVan44! Fill out the order form today http://goo.gl/forms/ymWtMxPtUn
-
- Main keyboard: WASD V2
- Favorite switch: MX Clear
- DT Pro Member: -
thanks for the feedback! I am working on some cheaper case alternatives so that I can offer some cheaper alternatives in the future.cookie wrote: ↑40% is by far the best HTPC size out there... but 160 bugs is over my budget for that.
Nice keyboard thought
-
- Location: Little Red Dot (Singapore)
- Main keyboard: access-is
- Favorite switch: my own
- DT Pro Member: -
another group buy with no ortholinear
;-(
;-(
-
- Main keyboard: WASD V2
- Favorite switch: MX Clear
- DT Pro Member: -
invoices are out, 1 week to pay. please pm me or email at thevankeyboards@gmail.com if you have any issues at all
-
- Main keyboard: WASD V2
- Favorite switch: MX Clear
- DT Pro Member: -
Cases have been ordered and production should start soon, soon like this week. Finalizing order with Signature Plastics for the keycaps and should have them ordered today. Will post SP receipt here when I have it.
If you have any questions please don't hesitate to ask.
A few more payments came in, thank you very much! I will be sending reminders today for those of you who haven't yet paid.
If you have any questions please don't hesitate to ask.
A few more payments came in, thank you very much! I will be sending reminders today for those of you who haven't yet paid.
-
- Main keyboard: WASD V2
- Favorite switch: MX Clear
- DT Pro Member: -
All group buy participants, I will be shipping to the address on file with PayPal. If you need your order shipped to another address, please send an email to thevankeyboards@gmail.com with your new address and your PayPal email.
Thanks!
Thanks!