[WTS/T] IBM F AT, IBM Alps Plate Spring keyboard

User avatar
Myoth

21 Jul 2017, 03:36

Hello wonderful people of Deskthority !

timestamps :
Image

What I want to trade :
  • IBM 5576-002
    Has seen lots of use, very clean nonetheless. They switches feel good and smooth but bind, it's pretty bad on some keys.
What I want to sell :
    What I already sold :
    Spoiler:
    • G80-1000HFDImage
      (updated timestamp because the last one was really bad)
      From 1995: https://i.imgur.com/ikjs1FQ.jpg
      Cherry MX Blue
      Thick Doubleshot ISO-DE ABS keycaps with Row5 bottom row
      Price : 42€ + shipping
    • Stock ISO NovatouchImage
      I was the first person to open this one, meaning that when I received it it was still NIB, though a dome was busted and I had to replace it, so it has been opened and there is so scratches due to that on [the back](https://i.imgur.com/v5vatD2.jpg) of the keyboard. I have replacement domes (4 or 5, something like that) and will include them, I also have the original box with not all original accessories (I might have them but I prefer saying I don't to be sure about it). KEYCAPS PICTURED ARE NOT INCLUDED, so it will be sold barebones (I should have the spacebar spring if you want it).
      I'd want 170€ for it.
    • 136x Vintage BlacksImage I received them in a trade as Vintage Blacks so I'm selling them like that as well. there is 136 of them as you can see in the timestamp (correct me if I'm wrong !) I'd prefer selling them at once and not by little bits.
      I'd want 45€+shipping for them.
    • Alps Electric ABS Doubleshot Keycaps from a rare SKCM Brown keyboardImage
      Incomplete
      chipped F3 https://i.imgur.com/cQ7xbkb.jpghttps://i.imgur.com/TwvwHRz.jpg
      10€
    • Aristotles 27xImage
      5€
    • Zenith ZKB-2RImage
      This keyboard features NOS Alps SKCL Yellow, the plate was a bit rusted so I sanded it lightly, the LEDs are pink. The badge was glued back together as it was broken when I got it. https://i.imgur.com/gG65slH.jpg The cable area is a bit broken.https://i.imgur.com/6sojHra.jpg There is some trace of something blue on the keycaps.
      https://i.imgur.com/EhpFQ5j.jpg
      90€ SHIPPED IN THE EU
    • 60% KC60SE with XD60 HHKB case and Vintage Black, genuine clipped Cherry stabsImage
      KC60SE which is not flashed, but works, I'm not good enough to flash it so you'll receive it unflashed (I did manage to flash it but everything seemed to be offset by one, I.E. Q was actually the tab key). it's got the XD60 case from AliExpress with a very small dent (?) on the right side blocker (you can see a bit of the shadowing it makes on the timestamp) and one on the front of the case, it's got vintage blacks, smooth and stock. they're genuine cherry stabs from faxe and I clipped them. A screw is missing from the plate mounting, but I think they're quite standard so you shouldn't have a hard time finding one.ImageImage
      80€ SHIPPED IN THE EU
    • G84-4420 x2Image
      the UK layout one has broken switches, they feel like trash
      40€ shipped EU, 60€ shipped USA
    • IBM F122
      I'm selling this piece of my collection as I noticed that I was only keeping it for its keycaps, so I harvested them and filled the board with one piece keycaps (it used to have 2 pieces and they were AZERTY ... yeah who'd want that anyway ? :P).
      I couldn't get the key next to the ISO key to work and since I couldn't decently sell it like that I opened it to see what was wrong with it .... for only to discover that it was a problem with the soarer converter. Dumb me.
      So now I've got a F122 I want to sell and it's opened, so I thought : "well, since they're often modded, I might as well sell it as is and after getting paid, I'll reassemble it with the layout of the buyer choice !" which is what I offer here :)
      Anyway, onto the real deal : here are the pics of it with the 1 piece caps so you get an idea of it'd look after getting assembled : Image
      and now onto the timestamp of the assembly :
      Image
      I don't have a lot of Buckling Spring mods, so I can't possibly sell it with all the caps you want, unfortunately. Once we've talked about it and we agree on the doability of the layout, then pay me, and I'll assemble it in the next few days and then I'll send it your way !
      270€ plus shipping
    • G80-0577Image
      Keycaps yellowed, in working order
      60€ shipped EU, 80€ shipped USA
    • IBM Displaywriter beamspringImageold timestamp but I sure can take new pictures if someone is interested.
      I am looking to trade this piece of my collection as I know I won't be using it and I'm not eager to keep it, I've restored it as much as I could (though there is still some work but it's definitely not a big deal)
      My restoration thread and more pictures :
      workshop-f7/ibm-displaywriter-restorati ... 18162.html
      I'm quite sure I'd be overtrading (as in overpaying but since I'm trading I'm overtrading ?) for all of the items here, I'd like a bit of additional cash depending on the item, but I wouldn't want the prices you see on ebay anyway, though if I feel like nobody is interested, I'm going to ask for money and ask for more than what I'd be willing to accept by trading, I really don't want to sell this keyboard, I really really want to trade it, I hope you understand.
    • Acer 6012 with SKCM Blues
      Image
      these usually don't come with SKCM Blues, but the KB-102AS they came from was trashed and since this 6012 was in really good shape, I thought it'd be worth it to swap them out to have clean Blue Alps. And they feel very good, they don't bind and they are smooth !I'm selling it for 210€ shipped EU
    • IBM F107
      Image
      I didn't think this day would come but it has, and it's a sad, sad day.
      THE ENTER KEY IS INCLUDED I'm putting for sale my beloved F107, it has been restored and converted, and it has Sabre keycaps (airline reservation sublegends). It has been dry lubed and is RIGHT NOW in ISO configuration, I don't really want to open it again to make it ANSI. It is completely working and has 0 flaws. Unfortunately the foot didn't survive the shipping from the land of freedom, I will include it anyway.
      more pics :
      https://i.imgur.com/kBKK5tL.jpg https://i.imgur.com/YUfGDvF.jpg https://i.imgur.com/vqRg0nJ.jpg https://i.imgur.com/3svfftC.jpg https://i.imgur.com/bC0w4Z2.jpg https://i.imgur.com/akskoOC.jpg https://i.imgur.com/oHsGrwP.jpg https://i.imgur.com/On0IgoQ.jpg
      I'm selling it for 470€ shipped EU
    • Steel 60% case
      Image
      it's thick and it's pretty heavy, it's "homemade" so it won't have the same quality as GB tier cases. I also have a board that came with it but it has BOX Navies and is dead, so I wasn't sure if anyone would be interested in it.
      more pics :
      https://i.imgur.com/gt28lfi.jpg https://i.imgur.com/UIR7yeh.jpg https://i.imgur.com/hnHxGoF.jpg https://i.imgur.com/HYPQ2zd.jpg https://i.imgur.com/8GhJwy8.jpg https://i.imgur.com/8eDregs.jpg https://i.imgur.com/z0FEpc6.jpg
      I'm selling it for 150€ shipped EU
    • F XT with bigfoot case
      Image Image
      This is a model F XT which will work with an XT converter, it's in no need to a restoration as it's in very good condition for such an old beast. You can choose between the Bigfoot case or the original one or both since I won't be needing either of those anymore. The keycaps come from various typewriters and are one piece dye subs.
      I'm selling it for 120€ shipped EU
    • G80-3000LSPGB
      I'm selling it for 25€+shipping
    • OG 1800 Cherry keycaps
      Image
      30€ shipped EU
    • Apple Standard Keyboard
      Image
      I've been on and off about selling this keyboard, I finally am decided about selling it, so here it goes, like the Z150 I can desolder it if you want.
      70€ shipped EU
    • Zenith Z150 with SKCL Green and dye sub keycaps
      It feels great, it's really smooth, I can desolder it if you only want the switches). I just cleaned it to sell it so it's now in perfect shape, there are a few scratches still but no matter how much I scrubbed they didn't go away.
      110€ shipped EU
    • 60% bundleImage
      XD64+DZ60, the XD64 works, it's just a bit fucky and will sometimes not get recognized by windows immediately so you need to plug it unplug it, but once it's recognized, there is absolutely no problems with it whatsoever. The DZ60 is still a mistery for me, I don't know why it stopped working and I'm actually sad it did because I like this keyboard, consider it a bonus. The XD64 has got Speed Bronze switches, and the DZ60 has got BOX Navy switches. case is included.
      50€ shipped EU
    • OG Swiss Cherry keycapsImage
      Those are in great condition, there is absolutely no shine, they're a bit yellowed, but not yellowed, just a bit warmer than OG PBT. additional pictures : https://i.imgur.com/7a6REox.jpg, https://i.imgur.com/syRCDJn.jpg, https://i.imgur.com/sgsw5s6.jpg
      45€ shipped EU
    • 60% pcb mounted build with 5* degree caseImage
      No problem whatsoever, I've used it a bunch but it's just sitting in it's box without doing anything, so I'm just going to sell it to someone who's going to enjoy it more, the switches are a mix of browns and pandas (not invyr pandas, Clears with Black springs)(with a grey stem). It includes a broken pcb for your tinkering satisfaction. there are 2 scratches, didn't notice them before searching for problems with the case. https://i.imgur.com/dby8eOc.jpg https://i.imgur.com/vBlWfZF.jpg
      100€ shipped EU
    • Ducky Shine 3 Image
      Perfect state, has 3 non working LEDs (Num Lock, D and W) https://i.imgur.com/dhUjtXx.jpg
      50€ shipped EU
    • Cooler Master Masterkeys Pro S with Kailh BOX Whites Image
      I bought this thinking that I would use while repairing another CM TKL I had, but I didn't receive the USB port with it, so I never used it, I have the case and the keycaps from a Rapid-I to go with it. https://imgur.com/a/yv98oIV
      30€ shipped EU
    • LZ-CLS WK Grey Image
      this is a grey kit, never soldered, a mean scratch on the bottom and a very specific dent which can only be seen with the board upside down at a specific angle. The plate is stainless, diffuser is spotless, and it includes an "LZ Limited" cloth.
      additional pics here : http://imgur.com/a/pIOoorO & http://imgur.com/a/k0GUV1J
      560usd shipped EU or 635usd shipped in countries like USA or KR (it's heavy)
    • Topre 105u : 220€ shipped[/size][/b]
      Image
      This is a keyboard I received in a trade without really knowing what I was going to do with it, but I had a vague idea, make a WK, WKL Topre keyboard. And with the help of mike52787, it was possible. "So how is it modified ?" you ask, well first, the domes were change to BKE Heavy redux, I tried these to a meetup back in February 2018 and I loved them, but as I grew more fond of light switches, when I actually installed them in my keyboard, I found out I didn't really like them. Then I got a Realforce 106 case from mike52787, I installed it because I knew the blockers would remove only 2 keys, and would leave a WinKey. And that's what I wanted. Back in August, I had joined the kbdfans' Topre 9009 group buy, I bought the Base, HHKB JP and ISO kit. The base and ISO kit for obvious reason, but I got the HHKB JP to be able to have an accented ISO enter key. As you can guess from that little write-up, it wasn't the easiest and lot of time went through that build, if you can call it that. So I am looking for about 220€ shipped for the keyboard, the rest of the keycaps, original keycaps. (and the original case, rest of the BKE redux domes if you really want them)
      Image
      Image
    • DAMAGED LZ CLS
      The switches are Zealios stems in Mod housing. You can get some keys to stick, but it doesn't occur unless you try to make them stick. MIND THE DENTS IN THE PICTURES. LOTS OF MORE PICS SHOWING OFF THE DAMAGE AND WHATNOT HERE : https://drive.google.com/open?id=1oqw8K ... yptt12CaqZ
      Image
      and even a typing video as I've been asked : https://youtu.be/CzRtjpfj3I8
      320€ without shipping/trades
    • HHKB Pro2 TYPE-S
      Super duper clean, I got it basically new, haven't seen much use since then .. which is why I'm putting it for trades. The black keyset isn't included but I have the original one.
    • G80-0606H
      Dark coloured keyboard. I was planning a collection of Bull keyboards but I grew sick of the hobby and want to keep my overall collection of keyboards small. So I'm selling this one.
      Image
      Image
      125€ shipped EU
    • G80-0695H
      Light coloured keyboard. Same thing as the other one, I thought it might work since it had a DIN5 plug, but no luck.
      Image
      Image
      125€ shipped EU
    • Black FC660C v2
      Spotless, the Hasu controller hasn't been installed but it'll be included. I thought it would be a goodmix between a RF86u and an HHKB, turns out it's a good inbetween, :shrug:.
      200€ shipped EU
    • IBM Model F AT
      Very good condition IBM Model F AT, very clean, feels sharp and nice all over. I planned on making this my endgame IBM board, but I realised I don't care much about IBM anymore, so here I am selling it.
      200€ shipped EU
    thanks for the attention and have a good day :)
    Last edited by Myoth on 29 Apr 2019, 21:44, edited 122 times in total.

    Tyr

    25 Jul 2017, 20:01

    Here's what I can offer. There's one deep dish "F" and a normal one, the "J" has a nubbin on it.The "0" and "numpad del" (yes it has a legend, it's azure on grey and very difficult to see - probably why it was in a grab bag) keys are actually R4, I don't think they usually come as R3. Same for the arrow cluster I have the bottom keys are R4 and the up-arrow is an R3 deep dish. The brown spacebar is a bit scuffed, it doesn't quite show on camera.

    User avatar
    Myoth

    25 Jul 2017, 21:16

    Tyr wrote: Here's what I can offer. There's one deep dish "F" and a normal one, the "J" has a nubbin on it.The "0" and "numpad del" (yes it has a legend, it's azure on grey and very difficult to see - probably why it was in a grab bag) keys are actually R4, I don't think they usually come as R3. Same for the arrow cluster I have the bottom keys are R4 and the up-arrow is an R3 deep dish. The brown spacebar is a bit scuffed, it doesn't quite show on camera.

    I'll pm you with what I need and such :)

    Tyr

    25 Jul 2017, 21:36

    Myoth wrote: I'll pm you with what I need and such :)
    Found a couple more: a "J" without nubbin, the "5" is a deep dish, the arrow is R3

    Image

    User avatar
    Myoth

    25 Jul 2017, 22:02

    Tyr wrote:
    Myoth wrote: I'll pm you with what I need and such :)
    Found a couple more: a "J" without nubbin, the "5" is a deep dish, the arrow is R3

    Image
    pm'd

    User avatar
    Myoth

    30 Jul 2017, 02:09

    updated

    User avatar
    Myoth

    02 Aug 2017, 20:13

    updated :]

    User avatar
    Myoth

    08 Aug 2017, 20:45

    updated

    User avatar
    Myoth

    10 Aug 2017, 04:33

    updated

    User avatar
    mecano

    12 Aug 2017, 13:07

    Hello Myoth, are you in Paris or nearby? I got several caps you are missing (P, R, S, 6 and possibly others) maybe we can meet, trade or fix something?

    User avatar
    Myoth

    12 Aug 2017, 17:21

    mecano wrote: Hello Myoth, are you in Paris or nearby? I got several caps you are missing (P, R, S, 6 and possibly others) maybe we can meet, trade or fix something?

    I live near Strasbourg ;) , meeting would be more expensive than shipping them ! pm if you want to trade/sell me keycaps ... :P

    User avatar
    Myoth

    14 Aug 2017, 17:06

    updateeeddddd

    User avatar
    Myoth

    08 Oct 2017, 19:12

    updated

    User avatar
    Darkshado

    09 Oct 2017, 08:13

    Si t'as besoin de quelques touches IBM Model M ou F, j'ai un ensemble de 1391402 presque complet ici. (Manque: la barre d'espace, F11, Impr Écran, Défil et un des Ctrl) Pas trop sûr à quoi ressembleraient les coûts d'expédition à partir du Québec.

    User avatar
    Myoth

    26 Oct 2017, 21:54

    Bump !

    User avatar
    Nuum

    27 Oct 2017, 10:45

    Hey, I'm interested in your terminal Model M. What would shipping to Germany be? Would you consider to sell just the keycaps?

    User avatar
    Myoth

    27 Oct 2017, 14:47

    Nuum wrote: Hey, I'm interested in your terminal Model M. What would shipping to Germany be? Would you consider to sell just the keycaps?

    The terminal M would be shipped for 22€, I wouldn't be too keen on the idea of just sending the keycaps as I'm basically making room for other keyboards :oops:. I calculated the price of shipped for the keycaps just to see if it was REALLY much cheaper and it was "only" 9€ cheaper ... It's up to you but the price difference is not much...

    User avatar
    Nuum

    27 Oct 2017, 16:46

    Relatable! I guess I should take the whole board then, I'll send you a PM.

    User avatar
    Myoth

    05 Nov 2017, 11:31

    updated :D

    User avatar
    Laser
    emacs -nw

    05 Nov 2017, 14:06

    timestamp pic (or any pics)?

    User avatar
    Myoth

    05 Nov 2017, 14:11

    Laser wrote: timestamp pic (or any pics)?
    oh I must have deleted it when I updated the post this morning, let me get it back up. It's not from today though, it is from this day :
    Myoth wrote: Bump !

    User avatar
    Laser
    emacs -nw

    05 Nov 2017, 14:35

    Well, I'm interested in the disassembled NTC_KB-6251 with green clones, sending you a PM about shipping :)

    User avatar
    Daniel Beardsmore

    05 Nov 2017, 15:05

    "KB-6251LN" … The "N" likely means "Nan-Tan switches" (i.e. Alps clones), but the "L" … I've never seen one before that has anything but "E" in that position. That's strange in itself.

    User avatar
    Myoth

    05 Nov 2017, 15:10

    Daniel Beardsmore wrote: "KB-6251LN" … The "N" likely means "Nan-Tan switches" (i.e. Alps clones), but the "L" … I've never seen one before that has anything but "E" in that position. That's strange in itself.
    I saw you said the same thing in the "ID this keyboard" thread when I acquired this keyboard :lol:
    Daniel Beardsmore wrote: The second keyboard is interesting. KB-6251LN. It's a [wiki]NTC KB-6251[/wiki]. The last letter is "N", for Nan-Tan switch. That series was notable for having linear switches as an option, which is what you have. It's a bog standard [wiki]four-tab clone[/wiki].

    The "L" is the surprise. Normally, it's EN (Nan Tan switch), EA (Alps switch) or EM (Mitsumi switch). Yours has "L" instead of "E" and I don't know why. Something must be different about it that's new to that model. Even the plate-mount types are still "E".

    User avatar
    Laser
    emacs -nw

    05 Nov 2017, 15:15

    Maybe the L was an E in the past (as in the letter E was erased by time to look like an L).

    EDIT: Saw the pic, doesn't look like it.

    Image

    User avatar
    Daniel Beardsmore

    05 Nov 2017, 21:18

    Hey, at least I am consistent!

    User avatar
    Myoth

    05 Nov 2017, 23:23

    Consistency is one of the greatest strength one can have !

    User avatar
    Myoth

    23 Dec 2017, 14:05

    bumppp

    davkol

    23 Dec 2017, 14:36

    That 91U is tempting.

    User avatar
    Myoth

    23 Dec 2017, 22:13

    davkol wrote: That 91U is tempting.
    can't say I wasn't tempted when I bought it ;)

    Post Reply

    Return to “For sale”