![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
Looks like the opening for the stock cable is only about 3/16 inch (0.1875 inch; 4.76 mm) . The opening for a micro-USB receptacle will require some widening.Muirium wrote: ↑Have a look at how thick the stock cable is. You should be able to fit a mini or (better) micro USB plug inside the empty exit just fine. Paint stripping is the bigger Rubicon you'll cross.
Excellent point! I was thinking the same thing while looking at my KS. While I prefer to put things together with screws rather than glue, in order to be less invasive, I might want to use something like this micro-USB "glue-in" receptacle from Adafruit:Muirium wrote: ↑Where are you planning on having the seam? The Kishsaver's case is a simple top and bottom half, which join around the original exit hole, unadorned. I reckon a smaller connector could be glued, with appropriate mounting, to the lower half of the case, and occupy that spot with the connector's widest edge lined up with the seam.
Panel mount sockets require more invasive work.
<snip>
Today I received a Mouser mini-USB connector with somewhat bigger pins that exit straight from the back rather than pointing downward at a right angle to the connector. It is part number MUSB-B551-O4 Mini B Single Vertical connector.Muirium wrote: ↑Where are you planning on having the seam? The Kishsaver's case is a simple top and bottom half, which join around the original exit hole, unadorned. I reckon a smaller connector could be glued, with appropriate mounting, to the lower half of the case, and occupy that spot with the connector's widest edge lined up with the seam.
Panel mount sockets require more invasive work.
<snip>
Yes, it's an original ibm set. The colors are still very bright and the printing is crisp. Got it from a dt member. I mixed it with a terminal set. All the modifiers are form the terminal set.Khers wrote: ↑Are those original APL-caps? The new addition is really pretty! Wouldn't mind one of those
I tried different bs CCs and brobots, but wasn't satisfied. It always was just 'too much' in combination with the apl keycaps.DanielT wrote: ↑No BS CC in this Kishy ?![]()
Nice board, a dream for a 60% lover like meExcept the ISO part, can't support that
You, sir, have all the things. Goodness gracious.wobbled wrote: ↑A friend of mine has finally come across both an Industrial SSK and a Kishsaver, I am way too excited to get my hands on them!! I hope nothing happens to me in the next few weeks, I need them in my life.
I didn't realise you'd had a sex change — but I guess that's to be expected in the technology industry.alh84001 wrote: ↑That's me in the bottom left corner :)
Haha I still don't own an unsaver though unfortunately!