Wang 725-3771-UK


29 Nov 2018, 22:45

I recently acquired my first Wang - a model 725-3771-UK made on the 34th week(?) of 1991. The board uses SKCM Salmon Alps and SKCL Yellow Alps for lock keys.
Alpha, Dirty.jpg
Alpha, Dirty.jpg (1.55 MiB) Viewed 689 times
The insert has shifted in the holder. I eventually managed to get it centered.
NumPad, Dirty.jpg
NumPad, Dirty.jpg (1.39 MiB) Viewed 689 times
Date.jpg (1.23 MiB) Viewed 689 times
Label.jpg (1.35 MiB) Viewed 689 times
Notice the @ symbol someone drew on the 2 key. They also drew quotation marks on the @ key.
Alps.jpg (1.45 MiB) Viewed 689 times
Here is the board after cleaning. It turned out really nice - It feels buttery smooth. I feel guilty even thinking about using it. The caps look and feel like they've never been used before and the cable is also very good - It hasn't uncoiled or creased.
completed.jpg (2.92 MiB) Viewed 689 times
Lotus 1-2-3 sticker over shortcut key insert
Lotus sticker.jpg
Lotus sticker.jpg (1.25 MiB) Viewed 689 times

I started by pulling all the caps (most of them very stubborn) and then opening the case.

The worst part was underneath the shortcut key holders - it took awhile to get clean. I also took some time to put the insert in the holders properly as they weren't aligned.
Keycaps Off.jpg
Keycaps Off.jpg (2.22 MiB) Viewed 689 times
The shielding is pretty cool - it's made out of some type of flexible plastic as opposed to cardboard which is commonly found in AT101s etc.
Shielding.jpg (1.32 MiB) Viewed 689 times
The board wasn't that dirty - just very dusty. I later noticed that there were only about 2 rust spots, the largest being about 7mm. It has been stored well.
Board out.jpg
Board out.jpg (2.69 MiB) Viewed 689 times
Controller.jpg (2.66 MiB) Viewed 689 times
PCB markings
PCB markings.jpg
PCB markings.jpg (1.29 MiB) Viewed 689 times
Alps mark.jpg
Alps mark.jpg (1.29 MiB) Viewed 689 times
Spider nest under foot lug.
20181129_155705.jpg (2.04 MiB) Viewed 689 times
I really shouldn't have opened the switches as every one was in immaculate condition - no dirt, no wear marks. I possibly made the switches worse by opening them and exposing them to the surrounding dirt from the plate...
20181128_205208.jpg (1.63 MiB) Viewed 689 times
By the time I had all switches done, I'd decided I was ready to clean the caps. I did my usual routine of soaking them in soapy water for a while, rinsing them, wiping them on a towel and then finishing them off with a wet Q-tip.
20181128_201813.jpg (3.05 MiB) Viewed 689 times
I also cleaned the case. It really wasn't dirty but I wish I could have removed the feet and cleaned them. Speaking of which, I'm missing an O-ring for one foot :oops:

Finally putting the caps back on
Clean Numpad.jpg
Clean Numpad.jpg (1.22 MiB) Viewed 689 times
Clean Alpha.jpg
Clean Alpha.jpg (1.21 MiB) Viewed 689 times
Apologies if any images are dark, I will try to get some better pictures soon!

User avatar

29 Nov 2018, 22:48

I don't care, take it out of context, but god fucking damn it, Wangs are very nice.

They're definitly underrated boards, they're not really hype nor all the rage, but they should because they are really cool boards, put clickies in one and you've got a hell of a good sounding clicky board (cf : photos-videos-f64/blue-alps-wang-725-t17916.html ).


29 Nov 2018, 23:07

Ugh don't tempt me. Iv'e already got a long list of boards I need to swap switches :roll: :lol:

User avatar

30 Nov 2018, 02:10

Beautiful resto on this old Wang.

You were right, it had been sitting somewhere quite nice with very little humidity. If it was in the Tropics, I suspect half the metal plate would of been gone by the time you've picked this baby up.

Thank you for a detailed recording of this unique 'Pommy-based' Keyboard ;) .

User avatar

30 Nov 2018, 08:18

Beautiful restoration, my man. I gotta say, Wang ISO Enters are THICC.


30 Nov 2018, 12:49

Cheers guys, I'm really happy with it. I really want to get my hands on some more Wangs now :shock: . Next step is to make a cable that will reach my PC :D

User avatar
Offtopicthority Instigator

30 Nov 2018, 17:48

Very nice thanks for posting, I bought a very similair WANG here years ago.

Post Reply

Return to “Gallery”