flowerlandfilms ELH-38 (Yellow Alps)

User avatar
flowerlandfilms

08 Sep 2019, 19:55

I need a board for my Maya hotkeys while 3D Modelling, so I've come up with this.
It will be a companion piece for my SGI AT-101, so I will be using its profile as a template.
It uses Yellow Alps and the case will be made of wood, here is the Quentin Blake bar napkin design.
quentin blake napkin.png
quentin blake napkin.png (570.91 KiB) Viewed 2885 times

User avatar
Muirium
µ

08 Sep 2019, 20:15

Too much colouring in. Not enough legends!

User avatar
flowerlandfilms

08 Sep 2019, 20:58

Muirium wrote:
08 Sep 2019, 20:15
Too much colouring in. Not enough legends!
The caps I'll be using will be harvested and repurposed from my old editing keyboards, the legends won't be what I need, but I have a plan for that, hehe.
IMG_20190720_165702.jpg
IMG_20190720_165702.jpg (2.91 MiB) Viewed 2851 times
In the meantime, it's off to the exotic Wood store to choose a material.
IMG_20190809_082300.jpg
IMG_20190809_082300.jpg (3.88 MiB) Viewed 2851 times

User avatar
flowerlandfilms

08 Sep 2019, 21:02

layoutpng.png
layoutpng.png (56.17 KiB) Viewed 2847 times

User avatar
flowerlandfilms

09 Sep 2019, 01:20

The two big pieces are Congolese Mahogany, this will be our build material.
IMG_20190809_093030.jpg
IMG_20190809_093030.jpg (4.67 MiB) Viewed 2809 times

User avatar
flowerlandfilms

09 Sep 2019, 13:54

Let's get to work!
IMG_20190810_083521.jpg
IMG_20190810_083521.jpg (2.76 MiB) Viewed 2755 times

User avatar
flowerlandfilms

09 Sep 2019, 14:56

IMG_20190810_093308.jpg
IMG_20190810_093308.jpg (2.97 MiB) Viewed 2743 times

User avatar
flowerlandfilms

09 Sep 2019, 16:50

IMG_20190810_104658_1.jpg
IMG_20190810_104658_1.jpg (2.8 MiB) Viewed 2722 times

User avatar
flowerlandfilms

09 Sep 2019, 17:51

I'll be taking the steel plate from a dissected editing console. This corner chunk is all I need.
IMG_20190804_191659.jpg
IMG_20190804_191659.jpg (3.22 MiB) Viewed 2704 times

User avatar
flowerlandfilms

09 Sep 2019, 18:52

Got the shape, just need to make some slices.
IMG_20190810_104849.jpg
IMG_20190810_104849.jpg (3.42 MiB) Viewed 2683 times

User avatar
flowerlandfilms

09 Sep 2019, 19:13

IMG_20190810_113023.jpg
IMG_20190810_113023.jpg (3.73 MiB) Viewed 2672 times

User avatar
flowerlandfilms

09 Sep 2019, 19:21

Figuring out the needed width.
IMG_20190810_122242.jpg
IMG_20190810_122242.jpg (3.29 MiB) Viewed 2667 times

User avatar
flowerlandfilms

09 Sep 2019, 19:39

Filling in the other pieces.
IMG_20190810_123245.jpg
IMG_20190810_123245.jpg (2.63 MiB) Viewed 2654 times

User avatar
//gainsborough
ALPSの日常

09 Sep 2019, 21:08

Yo this project is sick!! Keep the updates coming!

User avatar
CountNoctua

09 Sep 2019, 22:11

This project and that exotic wood shop pic (mmm, bloodwood) makes me wish I knew how to woodwork. And Alpsy!

Always been a Roald Dahl fan, so I love that Quentin Blake-style napkin design, too. :)

User avatar
flowerlandfilms

09 Sep 2019, 23:00

//gainsborough wrote:
09 Sep 2019, 21:08
Yo this project is sick!! Keep the updates coming!
Hoping to have it done, at least physically in the next couple of days.

User avatar
flowerlandfilms

09 Sep 2019, 23:01

CountNoctua wrote:
09 Sep 2019, 22:11
This project and that exotic wood shop pic (mmm, bloodwood) makes me wish I knew how to woodwork. And Alpsy!

Always been a Roald Dahl fan, so I love that Quentin Blake-style napkin design, too. :)
To be clear, my woodworking skills could use some finesse, but I'm trying to get better. That is my favourite store though, the endless possibilities of things that can be made.

User avatar
flowerlandfilms

09 Sep 2019, 23:05

I wish I had a proper bench grinder, but I blew all my money on the wood and a scroll saw.
IMG_20190811_142820.jpg
IMG_20190811_142820.jpg (2.97 MiB) Viewed 2589 times

User avatar
flowerlandfilms

09 Sep 2019, 23:54

IMG_20190811_152211.jpg
IMG_20190811_152211.jpg (3.18 MiB) Viewed 2570 times

User avatar
flowerlandfilms

10 Sep 2019, 00:56

Sponsored by Kincrome!
IMG_20190812_083009.jpg
IMG_20190812_083009.jpg (2.96 MiB) Viewed 2550 times

User avatar
flowerlandfilms

10 Sep 2019, 14:10

Okay got the basic shape of the wood done!
I'm going to sand it to 1200 Grit, then Danish Oil.
I think it will come up real nice.
IMG_20190816_171308.jpg
IMG_20190816_171308.jpg (3.16 MiB) Viewed 2499 times

User avatar
flowerlandfilms

10 Sep 2019, 18:57

Great colour and grain coming out, here it is with the plate attached.
IMG_20190825_192042.jpg
IMG_20190825_192042.jpg (3.41 MiB) Viewed 2478 times

User avatar
flowerlandfilms

10 Sep 2019, 19:00

Made some mistakes with the pine dowells showing through the wood, I didn't realise the sanding would take off so much material but oh well.
Here it is with switches.
IMG_20190825_193110.jpg
IMG_20190825_193110.jpg (4.31 MiB) Viewed 2473 times

User avatar
flowerlandfilms

10 Sep 2019, 19:02

And here it is viewed from the bottom.
The switch plate is suspended with small wood screws.
IMG_20190825_193244.jpg
IMG_20190825_193244.jpg (4.17 MiB) Viewed 2471 times

User avatar
//gainsborough
ALPSの日常

10 Sep 2019, 19:51

It’s coming together! Looking neat so far!!

User avatar
flowerlandfilms

10 Sep 2019, 20:05

//gainsborough wrote:
10 Sep 2019, 19:51
It’s coming together! Looking neat so far!!
Thanks, it's looking okay, looks even better with keycaps! [Legends to change]
IMG_20190826_164841.jpg
IMG_20190826_164841.jpg (3.2 MiB) Viewed 2455 times

User avatar
flowerlandfilms

10 Sep 2019, 20:22

I don't want red LEDs like some of these yellows come with, I want green, so I ordered some replacement square LEDs online. For the the switches that have no LEDs like this one, I just had to make two holes with a small push pin.
IMG_20190911_042112.jpg
IMG_20190911_042112.jpg (3.22 MiB) Viewed 2447 times

User avatar
flowerlandfilms

10 Sep 2019, 21:13

These editing keycaps are quite plentiful, so modifying them a bit is no huge crime. Pad printed, so I've found a light go with 600 Grit is enough to take off the lettering, without leaving striations on the surface. Plus it leaves a smooth canvas to put my new legends on. I'm using Avery clear label sheets, printing them out on a laser printer, this is a test on the blue ones and I like the way it looks.
IMG_20190830_001151.jpg
IMG_20190830_001151.jpg (2.99 MiB) Viewed 2420 times

User avatar
flowerlandfilms

10 Sep 2019, 21:42

Teensy wiring half done.
IMG_20190902_202924.jpg
IMG_20190902_202924.jpg (3.78 MiB) Viewed 2413 times

User avatar
flowerlandfilms

10 Sep 2019, 22:46

Teensy wiring all done!
IMG_20190903_004721.jpg
IMG_20190903_004721.jpg (4.08 MiB) Viewed 2381 times

Post Reply

Return to “Workshop”