Any help getting an XT keyboard to work with a Pro-Micro?
-
Jesseg
- Location: Australia
- Main keyboard: AEK1 - SKCM Salmon
- Main mouse: m720
- Favorite switch: Capacative buckling spring, Linear space invader
I picked up this old XT Keyboard with MX blacks, and a super heavy case, I really like this board and I’m trying to get it to work but it doesn’t want to play. Anyone able to help me out?
Last edited by Jesseg on 28 Oct 2019, 02:38, edited 1 time in total.
-
Findecanor
- Location: Stockholm, Sweden
- DT Pro Member: 0011
Both the Clock and Data lines should have 4.7K pull-up resistors to +5V.
Which firmware?
If you're using TMK, by default Pin "2"=PD1=Clock, and Pin "3"=PD0=Data unless you modify tmk_keyboard/converter/xt_usb/config.h (but I see no reason to).
You have connected pins "3" and "4" in the first image and just 3 in the second.
Which firmware?
If you're using TMK, by default Pin "2"=PD1=Clock, and Pin "3"=PD0=Data unless you modify tmk_keyboard/converter/xt_usb/config.h (but I see no reason to).
You have connected pins "3" and "4" in the first image and just 3 in the second.