In this huge box of cattoys
I just found this beautiful battleship
with quite weird keycaps as I discovered
but maybe you all expected that and I'm the only one this seems weird to.
In other news.
I just desoldered an old Acer board where the case sadly was completely broken during transport. Now I have quite a bunch of blue complicated alps. Maybe I should put them on my phantom. :p
Spoils of today...
- 7bit
- Location: Berlin, DE
- Main keyboard: Tipro / IBM 3270 emulator
- Main mouse: Logitech granite for SGI
- Favorite switch: MX Lock
- DT Pro Member: 0001
It is a UK board => You will find 3 white key stems under F, J and 5.Icarium wrote:...
with quite weird keycaps as I discovered
...

No 3270 emulator BTW, but does it work with a PC?
Last edited by 7bit on 07 Feb 2012, 00:19, edited 1 time in total.
- Icarium
- Location: Germany
- Main keyboard: These fields just
- Main mouse: opened my eyes
- Favorite switch: I need to bring stuff to work
- DT Pro Member: -
Oh, right. I actually wanted to ask if anybody knows what kind of buckling spring that is? I don't know the exact names but I believe some have rubber dome and some capacitive switches underneath or something.
And what do I need to hook this up to a PC? Soarer thingy?
And what do I need to hook this up to a PC? Soarer thingy?
Last edited by Icarium on 07 Feb 2012, 00:20, edited 1 time in total.
- Icarium
- Location: Germany
- Main keyboard: These fields just
- Main mouse: opened my eyes
- Favorite switch: I need to bring stuff to work
- DT Pro Member: -
Aawwww, damn! So close!7bit wrote:It is a UK board: You will find 3 white key stems under F, J and 5.Icarium wrote:...
with quite weird keycaps as I discovered
...
Dead on with F and J but 5 was gray.

- 7bit
- Location: Berlin, DE
- Main keyboard: Tipro / IBM 3270 emulator
- Main mouse: Logitech granite for SGI
- Favorite switch: MX Lock
- DT Pro Member: 0001
It is not a capacitive, it is a Model M terminal keyboard. Just pull the keystems out and you see if it is a rubberdome or a buckling spring.Icarium wrote:Oh, right. I actually wanted to ask if anybody knows what kind of buckling spring that is? I don't know the exact names but I believe some have rubber dome and some capacitive switches underneath or something.
ps: but don't pull the springs out!!!!

- Icarium
- Location: Germany
- Main keyboard: These fields just
- Main mouse: opened my eyes
- Favorite switch: I need to bring stuff to work
- DT Pro Member: -
Why what happens if I do?
Also, if you've never seen either I suspect it might be hard to tell them apart.
What's a 3270 emulator board? No, it does not work with a PC it comes with something that looks like a RJ45 connector.
Also, if you've never seen either I suspect it might be hard to tell them apart.
What's a 3270 emulator board? No, it does not work with a PC it comes with something that looks like a RJ45 connector.
- 7bit
- Location: Berlin, DE
- Main keyboard: Tipro / IBM 3270 emulator
- Main mouse: Logitech granite for SGI
- Favorite switch: MX Lock
- DT Pro Member: 0001
A 3270 terminal emulator works with a PC. But yours isn't an emulator board. However, there are way to fix this, but I'm not the expert for this.Icarium wrote:Why what happens if I do?
Also, if you've never seen either I suspect it might be hard to tell them apart.
What's a 3270 emulator board? No, it does not work with a PC it comes with something that looks like a RJ45 connector.
pulling the spring out:
It is like pulling out the wings of an insect!
It will hurt the keyboard. When a Tipro beeps on this planet, this is the scream of a ripped out buckling spring!

Last edited by 7bit on 20 Feb 2012, 01:28, edited 1 time in total.
- kbdfr
- The Tiproman
- Location: Berlin, Germany
- Main keyboard: Tipro MID-QM-128A + two Tipro matrix modules
- Main mouse: Contour Rollermouse Pro
- Favorite switch: Cherry black
- DT Pro Member: 0010