Another single-switch circuit board

kiltannen

02 Nov 2020, 22:26

Pluna wrote:
15 Aug 2020, 11:33
I have used the Amoeba King PCB to create a dactyl manuform with SK6812MINI-E on every switch.
Any chance you could share some pics?

ping

04 Nov 2020, 17:59

Sorry for the dumb question, I've been following this thread for a while now as a lurker. I wanted to order some of these and not sure which is the latest and greatest version?
Is it the one from mtl, jking or HID Tech?

https://github.com/mtl/keyboard-pcbs
https://github.com/JKing-B16/keyboard-pcbs
https://github.com/HID-Technologies/

and is king the best or royale?
Guess I'm just looking for most features/least problems.

Thanks in advance!

bstiq

09 Nov 2020, 12:06

ping wrote:
04 Nov 2020, 17:59
Sorry for the dumb question, I've been following this thread for a while now as a lurker. I wanted to order some of these and not sure which is the latest and greatest version?
Is it the one from mtl, jking or HID Tech?

https://github.com/mtl/keyboard-pcbs
https://github.com/JKing-B16/keyboard-pcbs
https://github.com/HID-Technologies/

and is king the best or royale?
Guess I'm just looking for most features/least problems.

Thanks in advance!
Hello ping,

I can't speak for the other links but here's my feedback on the HID Tech ones that I made.

The sole purpose of the 1u hotswap MX is to be easy to use - only two row connections, and two column connections.

I made them because I found the amoebas too "messy" if that makes sense.

I hope this helps.

ping

09 Nov 2020, 21:54

bstiq wrote:
09 Nov 2020, 12:06

Hello ping,

I can't speak for the other links but here's my feedback on the HID Tech ones that I made.

The sole purpose of the 1u hotswap MX is to be easy to use - only two row connections, and two column connections.

I made them because I found the amoebas too "messy" if that makes sense.

I hope this helps.

That was helpful, thank you for your response. :D

Post Reply

Return to “Workshop”