It's a 5251, but it's #1 in my heart

[just_add_coffee]

A while back, Taylorswiftttttt gave me a hell of a deal on a beamspring he had been working on. I finally got around to working on it.







I think that the crooked "Light" label adds something to the overall aesthetic. The dry-erase insert is glow-in-the-dark vinyl wrap on acetate, which has double-stick tape to hold it in position and is easily removable. I'm not crazy about that part, but I've got something better in mind if I can find some old dot-matrix printer paper.

And the warm white LEDs reflecting off the brushed copper vinyl wrap yells VINTAGE in my feeble mind.

[seebart]

I like the lighting but I'd never flex the case for those flip-switches...or for anything else.

Spoiler:

wrapo.jpg (187.7 KiB) Viewed 3671 times

[taylorswiftttttt]

Nice

[depletedvespene]

May I envy you?

[just_add_coffee]

I like the lighting but I'd never flex the case for those flip-switches...or for anything else.

Everything seems pretty sturdy. 1/4" thick plastic and the switch cover is mounted on a metal plate. Then again, I've been wrong many, MANY times before and my idiocy knows no bounds.

[just_add_coffee]

Nice

Thank you for making this possible!

[Chyros]

HAHAHAHAHA XD

[seebart]

I like the lighting but I'd never flex the case for those flip-switches...or for anything else.

Everything seems pretty sturdy. 1/4" thick plastic and the switch cover is mounted on a metal plate. Then again, I've been wrong many, MANY times before and my idiocy knows no bounds.

OF COURSE it's sturdy! I'm talking about the aesthetics which is a matter of taste of course. Being a vintage keyboard "purist" I just could not get myself to cut those holes in any Beamspring case.

[Halvar]

I especially like the illumination. How does the XT layout work out for you?

And can I ask how you get clean rounded-rectangular holes like that in a plastic case? I'd really like to be able to make holes in plastic that don't look like they were carved by a caveman, but with my Dremel, they always come out dreadful.

[OldIsNew]

Looks very nice - like that glow! Nice use of the switches and they look cool too - either going to turn on the solenoid or launch a missile or something!

[just_add_coffee]

I especially like the illumination. How does the XT layout work out for you?

And can I ask how you get clean rounded-rectangular holes like that in a plastic case? I'd really like to be able to make holes in plastic that don't look like they were carved by a caveman, but with my Dremel, they always come out dreadful.

The XT layout is ok. Not my favorite and legends that don't match the output annoy me. But I guess I adapt well enough.

And the holes are circular. The cylinder of the barrel goes through the keyboard case, then the switch cover goes on, and then a locking nut holds everything in place. The switch body is the inside of the case. And I used a Dremel to drill and widen the 15/32" -ish holes.

[just_add_coffee]

Nice use of the switches and they look cool too - either going to turn on the solenoid or launch a missile or something!

Growing up in the 70s and 80s and later when I was in the Army, these types of switches were on dang near everything ... to start vehicles, communications equipment, generators, etc., etc. They just scream vintage and over-engineered to me.

[Halvar]

And the holes are circular. The cylinder of the barrel goes through the keyboard case, then the switch cover goes on, and then a locking nut holds everything in place. The switch body is the inside of the case. And I used a Dremel to drill and widen the 15/32" -ish holes.

Ah, now I see it, thanks! I totally misinterpreted the photo.

[derzemel]

They just scream vintage and over-engineered to me.

Over-engineering is sexy