Apart from that, the kb has been cleaned, alps has been lubed, and now is in working condition. The caps has been retrobrighted with liquid peroxide but not the case. The plug is a DIN5, which I suppose is AT protocol, with a PS2 it works quite well. Some alps had the contact leave switched as they didn't work (white alps one works well although is a bit long but fits).
Btw, if anyone has a 1U Alps backspace, i would be interested. It would make this kb more typing friendly.
- Bottom of the kb. Those grey parts are actually risers, that tilt it some degrees
- MVIMG_20181112_185957.jpg (7.05 MiB) Viewed 2442 times
- MVIMG_20181112_190107.jpg (1.82 MiB) Viewed 2442 times
- MVIMG_20181112_190047.jpg (6.84 MiB) Viewed 2442 times
- MVIMG_20181112_190327.jpg (2.21 MiB) Viewed 2442 times
- MVIMG_20181112_191357.jpg (1.76 MiB) Viewed 2442 times
- photo_2018-11-12_19-27-36.jpg (109.85 KiB) Viewed 2442 times
- Board itself is made by Alps
- MVIMG_20181112_190549.jpg (7.47 MiB) Viewed 2442 times
- Data code of the board
- MVIMG_20181112_190605.jpg (8.56 MiB) Viewed 2442 times
- Caps
- MVIMG_20181112_191030.jpg (8.34 MiB) Viewed 2442 times
- Sidemolded
- MVIMG_20181112_191041.jpg (7.32 MiB) Viewed 2442 times
- Mostly are doubleshot, but some are tripleshot
- MVIMG_20181112_191100.jpg (8.83 MiB) Viewed 2442 times
.