deskthority

I mean it sounds terrible.. I wonder who made the decision to make the case black glossy plastic, the bane of everyones life.

Admittedly, I don't understand it either. However, that doesn't mean it doesn't have a place. If you don't like something, don't buy it. If you do like it that's great.. people do themed builds all the time customising every part the way they want it. Laserboost, when it's all said and done is the b...

That's not how Soarer's *converter* works at all. There is a default mapping. It simply 1:1 translates the original keyboard's output into USB keyboard codes. Soarer's *controller* meanwhile, does indeed need a map specified from scratch. Similar name, very different function. The controller has to...

Thanks for the detailed reply. Adding the Soarer tools folder to the path, allows one to address the contents of the folder from any other folder. I'm ok with the command line and don't really need that to execute the Soarer tools. I was under the impression that there is a default key mapping when...

@St0ckz: So far, I have flashed the Soarer hex file to the pro micro and then soldered the wires as you said I should. The original cable of the keyboard was forcibly removed, leaving behind the little black connection box that connects the cable to the pins on the pcb. I soldered the wires that re...

One step forward, soldering the wires to the pro micro successful. Fired up hid_listen: Waiting for device:.... I connect the keyboard to a usb port: Listening: wEE remaining: FFFC Keyboard ID: 0000 Code Set: 1 Mode: PC/XT R05 And then nothing happens when I press a key on the keyboard. Any suggest...

twasa wrote: ↑Thanks a lot St0ckz! I would have wired it incorrectly. That is completely clear.

You are most welcome, i just finished doing mine today in fact, it's a nice board. A tad loud compared to the lubed retooled blacks I usually run though

Thanks St0ckz. Looks like I have J1 top, then Tx0, Rx1, GND, GND, 2, 3 etc. Do I use the first GND? so usb port facing away from you White wire, right hand side, 2nd down marked GND Black wire, right hand side, 4th down marked VCC Yellow wire, left hand side, 5th down marked 2 Red wire, left hand s...

Just a sanity check if someone knowledgeable is around. I'm connecting an M122 (1390718) to a blue Pro Micro. Are these also correct for that keyboard: Black -> VCC White -> GND (third away from the usb connector) Red -> 3 Yellow -> 2 gnd on my blue pro micro is 2nd in that row, but otherwise corre...

I would like to give em a go but I really don't wanna deal with buying them from a website you need to enquire to

Out of curiousity, how much would shipping to the UK be? These seem pretty interesting, having a more muted click (from what I could hear from your sound test at least)