Another F-122 arrived yesterday. This one looks like it was never cleaned since put into use on May 15, 1984.
Unlike my 1986 F-122, this one (1984; PN 6110668) has a bank of 8 DIP switches on the bottom panel. Does this present any special challenges when installing a Teensy and Soarer's Converter?
IBM F-122 with DIP Switches
- Hypersphere
- Location: USA
- Main keyboard: Silenced & Lubed HHKB (Black)
- Main mouse: Logitech G403
- Favorite switch: Topre 45/55g Silenced; Various Alps; IBM Model F
- DT Pro Member: 0038
-
- Location: Houston, Texas
- Main keyboard: IBM Bigfoot
- Main mouse: CST trackball
- Favorite switch: IBM Model F
- DT Pro Member: -
It will probably work fine regardless of how the switches are set. I removed my switches during cleaning and then forgot how the connectors were aligned, so I left them off. It still worked fine with Soarer's, so leaving them installed but set to "off" will work for sure too. The switches set a keyboard identifier, but I don't know if Soarer's firmware checks them.
- scottc
- ☃
- Location: Remote locations in Europe
- Main keyboard: GH60-HASRO 62g Nixies, HHKB Pro1 HS, Novatouch
- Main mouse: Steelseries Rival 300
- Favorite switch: Nixdorf 'Soft Touch' MX Black
- DT Pro Member: -
Post some pictures! I'm sure phosphorglow will be on the hunt for some once he notices this thread. 

- vivalarevolución
- formerly prdlm2009
- Location: USA
- Main keyboard: IBM Beam spring
- Main mouse: Kangaroo
- Favorite switch: beam spring
- DT Pro Member: 0097
quantalume wrote:It will probably work fine regardless of how the switches are set. I removed my switches during cleaning and then forgot how the connectors were aligned, so I left them off. It still worked fine with Soarer's, so leaving them installed but set to "off" will work for sure too. The switches set a keyboard identifier, but I don't know if Soarer's firmware checks them.
I have an F-122 with DIP switches, and everything this guy said is true.
- Hypersphere
- Location: USA
- Main keyboard: Silenced & Lubed HHKB (Black)
- Main mouse: Logitech G403
- Favorite switch: Topre 45/55g Silenced; Various Alps; IBM Model F
- DT Pro Member: 0038
Will do. I need to borrow a camera first.scottc wrote:Post some pictures! I'm sure phosphorglow will be on the hunt for some once he notices this thread.