Handwired + Teensy + QMK = Confused
-
hellothere
- Location: Mesa, AZ USA
- Main keyboard: Lots
- Main mouse: CST2545W-RC
- Favorite switch: TopreAlpsHallEffectTopreAlpsHallEffectTopreAlps
Cool!
-
Quartz64
- Location: Russia
- Main keyboard: Kinesis Contoured (Kailh Box Black, Koala)
- Main mouse: Elecom Huge
- Favorite switch: Durock Koala
- DT Pro Member: 0253
- Contact:
Update:
- PSD file with rows, columns, pinout and rewiring info in separate layers
- Album with pinout and rewiring info in separate photos. Pink color = cut traces here, green color = put wire bridges here
- Precompiled FW for Teensy2.0 with default keymap
- Precompiled FW for Teensy2.0 with debug keymap
- QMK branch
-
hellothere
- Location: Mesa, AZ USA
- Main keyboard: Lots
- Main mouse: CST2545W-RC
- Favorite switch: TopreAlpsHallEffectTopreAlpsHallEffectTopreAlps
Hi! Thanks very much, Q.
Yesterday, I de-soldered all the misc electronics from the PCB, other than the diodes, and started trying to do some wiring. That was a little unpleasant, primarily because my wire stock is rather poor, and secondarily because some of the solder pads came off when I just touched them and I had to repair those. I have some new wire on order and I'll try to get to this again either sometime this week or sometime this weekend.
Yesterday, I de-soldered all the misc electronics from the PCB, other than the diodes, and started trying to do some wiring. That was a little unpleasant, primarily because my wire stock is rather poor, and secondarily because some of the solder pads came off when I just touched them and I had to repair those. I have some new wire on order and I'll try to get to this again either sometime this week or sometime this weekend.