Happy fresh owner of a Celeritas MX brown - with only one reservation:
i'd like to have lower profile iso keycaps - preferably in white;
Which used keyboards could i use to source the caps or does cherry sell them new as spare parts?
Grateful for any shared experience.
Zowie Celeritas - a simple way to get lower keycaps?
- damorgue
- Location: Sweden
- Main mouse: MX500
- Favorite switch: BS, MX Green and MX Clear
- DT Pro Member: -
- Contact:
Example of my cheap lasered PBT Cherry set --> http://i.imgur.com/px87D.jpg
I have extras of that one, unfortunately it has an ISO enter but ANSI left shift. Which language are you looking for?
I have extras of that one, unfortunately it has an ISO enter but ANSI left shift. Which language are you looking for?
- rindorbrot
- Location: Bavaria, Germany
- Main keyboard: Phantom, GON NerD 2.0 TKL
- Main mouse: Zowie ZA11
- Favorite switch: MX Ergo-Clear, Nixdorf Soft-Touch
- DT Pro Member: 0029
He's from Germany and the picture shows DE layout, too.
So I guess he's looking for a German set.
You could use the keycaps from a newer Cherry G80-3000, but the Spacebar and Capslock will not fit the Zowie.
If you manage to find some Doubleshots from an older Cherry board, the rest of the bottom row will also don't fit (because of the 1.5x Modifiers).
So I guess he's looking for a German set.
You could use the keycaps from a newer Cherry G80-3000, but the Spacebar and Capslock will not fit the Zowie.
If you manage to find some Doubleshots from an older Cherry board, the rest of the bottom row will also don't fit (because of the 1.5x Modifiers).
- Jmneuv
- Location: DE
- Main keyboard: Phantomized QFR
- Main mouse: LX8 (mod)
- Favorite switch: 68g
- DT Pro Member: -
thanks guys;
yes, i'm looking for a german layout;
Very helpful info about the spacebar on the newer G80 .. in fact i was just considering getting one new for repurposing. Think i'll hold off on that until i have a spacebar/capslock solution;
yes, i'm looking for a german layout;
Very helpful info about the spacebar on the newer G80 .. in fact i was just considering getting one new for repurposing. Think i'll hold off on that until i have a spacebar/capslock solution;
-
- Location: Jersey, Channel islands (sort of UK)
- Main keyboard: IBM model m '86
- Main mouse: CM storm spawn...trackball soon too.
- Favorite switch: buckling spring
- DT Pro Member: -
loads of german sets one ebay.de have a hunt.
-
- Location: USA
- Main keyboard: KBC Poker MX Red
- Main mouse: Logitech MX Revolution
- Favorite switch: MX Red
- DT Pro Member: -
There are DE version of G80-8113 or 8200 which have fulltouch caps lock, though I hardly ever see them come up on ebay. There are some other Cherry G80 models with flat caps lock that is compatible as well, just need to keep eye out or maybe just make a want to buy in the marketplace. Shouldn't be too hard to get if you aren't fussy about which legend it has, most easy to find one that has 'Caps Lock' from US version.
If you would prefer doubleshot, perhaps keep eye out for WEY EK-2000. Those set are really white, though I am not sure about finding in DE, I most often see GB layout, but have seen others.
If you would prefer doubleshot, perhaps keep eye out for WEY EK-2000. Those set are really white, though I am not sure about finding in DE, I most often see GB layout, but have seen others.
- Jmneuv
- Location: DE
- Main keyboard: Phantomized QFR
- Main mouse: LX8 (mod)
- Favorite switch: 68g
- DT Pro Member: -
ahrrrr patience....
i'll much likely be participating in the gmk group;
For now i decided not be too picky about perfect matching, focusing on the lower profile and typing experience first.
Just initiated my first go at that by buying a used doubleshot G81 off ebay.
Now i'm trying to order a leftover spacebar and some blank mods from the moogle kit from hashbaz.
That leaves the capslock.. i'd be fine with just putting a shift-key or similar on there.
i'll much likely be participating in the gmk group;
For now i decided not be too picky about perfect matching, focusing on the lower profile and typing experience first.
Just initiated my first go at that by buying a used doubleshot G81 off ebay.
Now i'm trying to order a leftover spacebar and some blank mods from the moogle kit from hashbaz.
That leaves the capslock.. i'd be fine with just putting a shift-key or similar on there.