|Actuation force||30, 35, 45, and 55 cN|
Topre switches are, as described by Topre Corp., the 'Only one "Made in Japan" electrostatic capacitive non-contact type keyboard in the world'.
From the Topre Patent:
"The present invention has been made in consideration of the above situation, and has as its object to provide a keyboard switch wherein constant hysteresis can be obtained without changing the operation characteristics even if an operation value is arbitrarily set, thereby properly preventing chattering, and wherein an operator can know that the operation member has been depressed to a depth corresponding to the operation value.
According to one aspect of the present invention, there is provided a keyboard switch comprising an insulating substrate, a first electrode laid on the insulating substrate, a second electrode facing the first electrode, a dielectric disposed between the first and second electrodes, said second electrode being formed of a conical coil spring, and being positioned on the dielectric so that one end portion of the spring may be in contact with the surface of the dielectric, a capacitance between the first and second electrodes being mainly defined by the contact area between the dielectric and second electrode, a button on the other end portion of the second electrode for compressing the second electrode toward the first electrode to change the contact area when the button is depressed toward the first electrode, said capacitance varying with the change in the facing area which changes substantially in proportion to the depth of depression of the button, and a means for giving snap feeling to an operator when the button is depressed and the capacitance exceeds a given value, whereby the switch is capacitively coupled for a switching operation and the snap feeling is given to the operator when the capacitance exceeds the given value."
The switch consists of a slider in a housing over a rubber dome over a conical coiled spring over a printed circuit board. Switches are discrete components, but built as sheets.
The rubber dome provides most of the resistance and tactile feel. Keyboards can have differently weighted rubber domes on different keys, similar to the Key Tronic ErgoForce.
When the conical spring is compressed, a capacitative sensing mechanism on the PCB senses the key press mid-actuation. Circuitry on the PCB collects sensing data from smaller key groups and feeds it to the controller. This scheme has the capacity for providing N-key roll-over.
All stabiliser bars are located inside the keyboard, often as part of each switch, connected to the slider itself. Most stabilised keys are mounted only in the centre; on many keyboards, only the space bar needs two extra stabilising mounts on the sides.
The switch action is very smooth, with a tactile bump that you can feel near the top of the stroke. After the bump, the resistance is almost flat, making it difficult to avoid bottoming out. You can not feel the mid-stroke actuation point. It bottoms out distinctly with a thock sound.
Some Topre keys are very light, which can lead to unintended key activations; this happens especially on keyboards that have differently weighted switches for different fingers.
There is an ongoing disagreement within the keyboard community whether this switch should be categorised as "mechanical", as "rubber dome" or even as "semi-mechanical". Some of this controversy might be based on disagreement whether the categorisation should be based on the switch's construction (there being a rubber dome inside it vs. there being a metal spring inside it -- the Topre switch having both) or by some of its properties (crisp, light feel and mid-stroke actuation point) being different from typical rubber-dome keyboards.
The switch's rubber dome does provide most of its resistance and all of the tactile feel, but unlike typical rubber dome keyboards, the rubber dome in the Topre switch does not provide any "mushy" resistance near the bottom of the stroke. The conical spring provides only around 5 cN of actuation force and is therefore a critical component only for sensing key presses.
| The standard Topre switch. This is by far the most prevalent.
Available in many different weights and present on the vast majority of Topre made keyboards.
|These purple switches are used in Realforce keyboards.|
|This is the Topre Short-throw switch used in compact layout keyboards. It was previously thought to only exist in 55cN weighted configurations; however, this assumption was based on measurements gathered or guessed at by users. The only known cited force measurement for Topre Short-throw boards is '40±15%' which presumably means 40 grams with a 15% margin for error.|
| Two-tone switches used on the Happy Hacking Keyboard Professional (Type-S pictured).
The main switch housing is moulded onto the plastic. Only the plunger can be removed, as opposed to the standard Realforce switch, which can be removed completely from the mounting plate.
| Second revision of the Topre keychain switch, provided at promotional Realforce events in Japan.
This version has a clear acrylic housing and a coloured keycap with ‘REALFORCE’ printed on the top. The ‘A’ symbol on the second revision is coloured red as per Topre’s standard advertising for Realforce keyboards. The first version had a clear acrylic base only. It also has a coloured keycap and the ‘REALFORCE’ print on the top, without the red ‘A’ symbol.
| High set, or 'Hi-Pro' switches, pictured here to the left of a standard Topre switch.
These are used in a number of Topre keyboards including the Realforce branded 108UG, 104UG and 104UK Hi-Pro keyboards, as well as some Topre OEM data entry keyboards such as the Juki Celavi-i, Juki DATUM, Nissho KB106DE and the Hatsucoh Electronics HEKB01. All keyboards have tall, spherical keycaps.
|Alternate dome design used on a conductive Topre switch variant. There are two keyboards known to have this switch: the Sony BKE-2011 and the Sony BKE-2010. It is suspected that this design was also used on the Sony NWS-1200; however, complete details of the NWS-1200 are not known. The slider design is the same as seen on the standard Topre capacitive switch.|
|The Topre-made switch exclusive to the Cooler Master NovaTouch TKL keyboard. Cooler Master collaborated with Topre to produce the first Topre switch variant that shares keycap compatibility with the popular Cherry MX line of switches.|
Internal components (Capacitive switch)
Comparison of keycaps from a short-throw keyboard and a standard keycap (far right). Note the more conventional stabiliser method used for modifiers on a short-throw keyboard.
Switch housings and sliders from a silenced switch (left) and a standard switch.
Switch sliders from a silenced switch (left) and a standard switch. Note the foam o-ring on the silenced variant. The longer stem on the silenced variant counters the reduced travel from the foam o-ring. Not all silenced switches have this adjustment.
Internal components (Conductive switch)
A rubber dome from the switch of a Sony BKE-2011. Conductive rubber contacts are used on this dome design, instead of the standard capacitive switching used in most Topre keyboards. No conic spring is required.
- Deskthority — Topre switch / Cherry MX compatible — Post from CM Bram on CoolerMaster's pick for switch colour. Posted 2014-03-21. Retrieved 2015-08-02.
- (Wayback Machine) CTCSP/Shitishi sp Ltd. — CTC SP catalogue dated February 2003 with Topre Short-throw model information Archived 2003-08-10. Retrieved 2015-08-02.
- Ueno Koichi Nishi Clinic PC — Details of a chattering issue repair attempt on a Sony NWS-1200 Retrieved 2015-08-02.