Difference between revisions of "Rubber dome"
Jump to navigation
Jump to search
Findecanor (talk | contribs) m (Text replace - "Z mount" to "Alps mount") |
(Modifications) |
||
| Line 1: | Line 1: | ||
{{stub}} | {{stub}} | ||
| − | '''Rubber dome''' is a type of keyboard switching technology that is most commonly used on modern keyboards, using collapsible rubber domes to provide resistance and tactility to keys. Most rubber dome keyboards use a membrane contact sheet below the dome to provide electrical switching, but certain rubber dome switches, such as [[Topre switch]]es, use capacitive switching. | + | '''Rubber dome''' is a type of keyboard switching technology that is most commonly used on modern keyboards, using collapsible rubber domes to provide resistance and tactility to keys. The rubber dome replaces the helical [[spring]] found in other switch types, although some keyboards do use both, including [[Fujitsu Peerless]] and one [[Alps integrated dome]] variant. |
| + | |||
| + | Most rubber dome keyboards use a membrane contact sheet below the dome to provide electrical switching, but certain rubber dome switches, such as [[Topre switch]]es, use capacitive switching, and a small number of boards used a [[PCB]]. | ||
==Contact mechanism== | ==Contact mechanism== | ||
| Line 10: | Line 12: | ||
:The "ceiling" of the dome presses two plastic membranes together to connect circuit traces; such keyboards require three membrane layers: upper and lower with exposed conductive traces, and a separator sheet to keep the conductor membranes separated until pairs of contacts are pressed together. | :The "ceiling" of the dome presses two plastic membranes together to connect circuit traces; such keyboards require three membrane layers: upper and lower with exposed conductive traces, and a separator sheet to keep the conductor membranes separated until pairs of contacts are pressed together. | ||
;Membrane with carbon-coated domes | ;Membrane with carbon-coated domes | ||
| − | :The ceiling of the dome is coated with carbon, and this conductive layer connects a pair of circuit traces together when it makes contact with the membrane. | + | :The ceiling of the dome is coated with carbon, and this conductive layer connects a pair of circuit traces together when it makes contact with the membrane or PCB. |
;Capacitive | ;Capacitive | ||
:[[Realforce|Topre Realforce]] keyboards use the rubber dome solely as a spring, and switch actuation is performed using capacitance via a 5 cN spring compressed by the dome. | :[[Realforce|Topre Realforce]] keyboards use the rubber dome solely as a spring, and switch actuation is performed using capacitance via a 5 cN spring compressed by the dome. | ||
| Line 28: | Line 30: | ||
:A stem is moulded into the keycap that pushes down on the dome; this is the most common variety | :A stem is moulded into the keycap that pushes down on the dome; this is the most common variety | ||
;Domes with sliders | ;Domes with sliders | ||
| − | :Similar to a microswitch mechanical, each switch contains its own [[slider]] that presses on the dome, onto which the keycap is [[ | + | :Similar to a microswitch mechanical, each switch contains its own [[slider]] that presses on the dome, onto which the keycap is [[Keycap mount|mounted]]; on some keyboards the slider has a standard Cherry MX mount or Alps mount interface and the board will accept keycaps from mechanical keyboards and donate keycaps for mechanical boards. Dome switches with sliders are now uncommon, but this is the form taken by Topre switches |
;Scissors | ;Scissors | ||
:Laptop keyboards introduced the use of [[Scissor switch|scissor-like]] mechanisms to stabilise low travel switches that lack a shaft for the keycap to slide inside | :Laptop keyboards introduced the use of [[Scissor switch|scissor-like]] mechanisms to stabilise low travel switches that lack a shaft for the keycap to slide inside | ||
Revision as of 14:13, 23 June 2013
This article is a stub. You can help Deskthority by expanding it.
Rubber dome is a type of keyboard switching technology that is most commonly used on modern keyboards, using collapsible rubber domes to provide resistance and tactility to keys. The rubber dome replaces the helical spring found in other switch types, although some keyboards do use both, including Fujitsu Peerless and one Alps integrated dome variant.
Most rubber dome keyboards use a membrane contact sheet below the dome to provide electrical switching, but certain rubber dome switches, such as Topre switches, use capacitive switching, and a small number of boards used a PCB.
Contact mechanism
_domes_from_below.jpg)
Membrane rubber domes from the AppleDesign Keyboard
Dome switch keyboards use several contact mechanisms:
- Membrane
- The "ceiling" of the dome presses two plastic membranes together to connect circuit traces; such keyboards require three membrane layers: upper and lower with exposed conductive traces, and a separator sheet to keep the conductor membranes separated until pairs of contacts are pressed together.
- Membrane with carbon-coated domes
- The ceiling of the dome is coated with carbon, and this conductive layer connects a pair of circuit traces together when it makes contact with the membrane or PCB.
- Capacitive
- Topre Realforce keyboards use the rubber dome solely as a spring, and switch actuation is performed using capacitance via a 5 cN spring compressed by the dome.
- Discrete dome switches
- The Alps integrated dome switch is a discrete, self-contained switch that uses a rubber dome with a conductive pad to connect two metal contacts at the bottom of the switch
Gallery
Membrane domes from the AppleDesign Keyboard
Membrane sheets and domes from the AppleDesign Keyboard
_domes_from_above.jpg)
_membrane_sheets.jpg)
Varieties
- Plain rubber dome
- A stem is moulded into the keycap that pushes down on the dome; this is the most common variety
- Domes with sliders
- Similar to a microswitch mechanical, each switch contains its own slider that presses on the dome, onto which the keycap is mounted; on some keyboards the slider has a standard Cherry MX mount or Alps mount interface and the board will accept keycaps from mechanical keyboards and donate keycaps for mechanical boards. Dome switches with sliders are now uncommon, but this is the form taken by Topre switches
- Scissors
- Laptop keyboards introduced the use of scissor-like mechanisms to stabilise low travel switches that lack a shaft for the keycap to slide inside
