Difference between revisions of "KVM switch"

From Deskthority wiki
Jump to navigation Jump to search
(Categorised...)
(Added a rabbit-hole of stuff that I had fallen into recently)
Line 3: Line 3:
 
A '''KVM switch''' switches a single setup of '''k'''eyboard, '''v'''ideo and '''m'''ouse (or some other combination) between different host computers so that the same setup could be used to control either.
 
A '''KVM switch''' switches a single setup of '''k'''eyboard, '''v'''ideo and '''m'''ouse (or some other combination) between different host computers so that the same setup could be used to control either.
  
Because a KVM switch with USB carries its own keyboard emulation, it could sometimes help when there are problems in the communication in certain combinations of host and keyboard.
+
A '''KM switch''' is a simpler variant that connects only '''k'''eyboard and '''m'''ouse.
 +
 
 +
KVM switches are typically hardware boxes. Some KVM switches switch also audio.
 +
KM switches can also be implemented in software between networked computers.
 +
 
 +
==USB ports and HID emulation==
 +
There are (in general) two different types of USB ports on KVM/KM switches. Different switches have only one of either type or ports of both types.
 +
 
 +
* "Hub port": The switch disconnects/connects ports when switching.
 +
 
 +
* Dedicated "mouse", "keyboard" or "HID port". The switch acts as USB host to keyboard and mouse, and as keyboards and mice to the host computers.
 +
 
 +
On many KVMs, dedicated HID/keyboard ports allow the KVM to switch hosts using a shortcut on the keyboard.
 +
In some cases these ports can help when there are problems in the communication in certain combinations of host and keyboard.
 +
 
 +
A switched USB port should work with more types of devices, but devices lose power when switching, and reconnect-events can cause annoying side-effects on the computers.
 +
 
 +
==Screen-edge switching==
 +
Some KM switches can switch by moving the mouse pointer over screen edges. This is more common on software KM switches.
 +
 
 +
Screen-edge switching is supported by a few hardware KVMs with emulated USB ports.
 +
These provide ''absolute'' coordinates to the host computers like a [[graphics tablet]] or [[touch screen]]. They require that the monitor setup and video resolutions be configured into the switch or else mouse precision could be inaccurate. Screen-edge switching does also not work with BIOS'es — because those require relative coordinates.
 +
Windows PCs that connect more than one monitor also require special mouse drivers.
 +
<ref name="belkincmcg">Belkin [http://cache-www.belkin.com/support/dl/Belkin%20Secure%20KM%20Custom%20Configuration%20Guide%20Rev%20A00.pdf F1DN104K-3 F1DN108K-3 Custom Monitor Configuration Guide]. Retrieved 2020-04-18 </ref><ref name="blackboxgasc">Blackbox [http://www2.blackboxab.se/Firmware/K/KV0004A/KV0004A%20Glide-and-switch.pdf KV0004A Glide-and-Switch]. (user manual) Retrieved 2020-04-18</ref>
 +
 
 +
==Software KM switch==
 +
These programs require to be installed on all computers and that they are configured for networking. Some hardware assume that all nodes are on a local area network.
 +
 
 +
Unlike hardware KM's they often support copy/paste between computers. Some support even file transfer.
 +
 
 +
One popular software-KM is [https://en.wikipedia.org/wiki/Synergy_(software) Synergy]. There are both proprietary and open source variants.
 +
 
 +
''Logitech Flow'' is a software KM that works only with special wireless mice and keyboards from [[Logitech]]. However, rather than forwarding input from a master PC or Mac over the network, it switches which paired host that the Logitech peripherals should talk to over [[Bluetooth]] Low Energy or [[Logitech Unifying|Unifying]].<ref name="howtogeekLogitechFlow">HowToGeek—[https://www.howtogeek.com/317962/how-to-use-logitech-flow-for-mice-and-keyboards-across-multiple-computers/ How to Use Logitech Flow for Mice and Keyboards Across Multiple Computers]. Dated 2017-08-01. Retrieved 2020-04-17</ref>
  
 
==External links==
 
==External links==
 
* [http://en.wikipedia.org/wiki/KVM_switch KVM switch] on Wikipedia (much more info than here)
 
* [http://en.wikipedia.org/wiki/KVM_switch KVM switch] on Wikipedia (much more info than here)
 +
 +
==References==
 +
<references/>
  
 
[[Category:Keyboard terms]]
 
[[Category:Keyboard terms]]

Revision as of 15:30, 19 April 2020

This article is a stub. You can help Deskthority by expanding it.

A KVM switch switches a single setup of keyboard, video and mouse (or some other combination) between different host computers so that the same setup could be used to control either.

A KM switch is a simpler variant that connects only keyboard and mouse.

KVM switches are typically hardware boxes. Some KVM switches switch also audio. KM switches can also be implemented in software between networked computers.

USB ports and HID emulation

There are (in general) two different types of USB ports on KVM/KM switches. Different switches have only one of either type or ports of both types.

  • "Hub port": The switch disconnects/connects ports when switching.
  • Dedicated "mouse", "keyboard" or "HID port". The switch acts as USB host to keyboard and mouse, and as keyboards and mice to the host computers.

On many KVMs, dedicated HID/keyboard ports allow the KVM to switch hosts using a shortcut on the keyboard. In some cases these ports can help when there are problems in the communication in certain combinations of host and keyboard.

A switched USB port should work with more types of devices, but devices lose power when switching, and reconnect-events can cause annoying side-effects on the computers.

Screen-edge switching

Some KM switches can switch by moving the mouse pointer over screen edges. This is more common on software KM switches.

Screen-edge switching is supported by a few hardware KVMs with emulated USB ports. These provide absolute coordinates to the host computers like a graphics tablet or touch screen. They require that the monitor setup and video resolutions be configured into the switch or else mouse precision could be inaccurate. Screen-edge switching does also not work with BIOS'es — because those require relative coordinates. Windows PCs that connect more than one monitor also require special mouse drivers. [1][2]

Software KM switch

These programs require to be installed on all computers and that they are configured for networking. Some hardware assume that all nodes are on a local area network.

Unlike hardware KM's they often support copy/paste between computers. Some support even file transfer.

One popular software-KM is Synergy. There are both proprietary and open source variants.

Logitech Flow is a software KM that works only with special wireless mice and keyboards from Logitech. However, rather than forwarding input from a master PC or Mac over the network, it switches which paired host that the Logitech peripherals should talk to over Bluetooth Low Energy or Unifying.[3]

External links

  • KVM switch on Wikipedia (much more info than here)

References

  1. Belkin F1DN104K-3 F1DN108K-3 Custom Monitor Configuration Guide. Retrieved 2020-04-18
  2. Blackbox KV0004A Glide-and-Switch. (user manual) Retrieved 2020-04-18
  3. HowToGeek—How to Use Logitech Flow for Mice and Keyboards Across Multiple Computers. Dated 2017-08-01. Retrieved 2020-04-17